LM2902-Q1 Datasheet, PDF (1/10 Pages) Texas Instruments – QUADRUPLE OPERATIONAL AMPLIFIER

LM2902ĆQ1
QUADRUPLE OPERATIONAL AMPLIFIER
D Qualification in Accordance With
AEC-Q100^†
D Qualified for Automotive Applications
D Customer-Specific Configuration Control
Can Be Supported Along With
Major-Change Approval
D ESD Protection <500 V Per MIL-STD-883,
Method 3015; Exceeds 200 V Using
Machine Model (C = 200 pF, R = 0); 1500 V
Using Charged Device Model
D ESD Human Body Model >2 kV
Machine Model >200 V and
Charge Device Model = 2 kV For
K-Suffix Devices.
D Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
D Low Input Bias and Offset Parameters:
− Input Offset Voltage . . . 3 mV Typ
− Input Offset Current . . . 2 nA Typ
− Input Bias Current . . . 20 nA Typ
† _{Contact factory for details. Q100 qualification data available on}
request.
SGLS178D − AUGUST 2003 − REVISED DECEMBER 2004
D Common-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground
D Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage:
− Non-V devices . . . 26 V
− V-Suffix devices . . . 32 V
D Open-Loop Differential Voltage
Amplification . . . 100 V/mV Typ
D Internal Frequency Compensation
D OR PW PACKAGE
(TOP VIEW)
1OUT 1
1IN− 2
1IN+ 3
V_CC ⁴
2IN+ ⁵
2IN− ⁶
2OUT ⁷
14 4OUT
13 4IN−
12 4IN+
11 GND
10 _3IN+
9 _3IN−
8 _3OUT
description/ordering information
This device consists of four independent high-gain frequency-compensated operational amplifiers that are
designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies
is possible when the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffixed devices), and
V_CC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is
independent of the magnitude of the supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional
operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For
example, the LM2902 can be operated directly from the standard 5-V supply that is used in digital systems and
easily provides the required interface electronics without requiring additional ±15-V supplies.
ORDERING INFORMATION
TA
VIO max
AT 25°C
MAX VCC
PACKAGE‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
7 mV
26 V
SOIC (D)
TSSOP (PW)
Reel of 2500
Reel of 2000
LM2902QDRQ1
LM2902QPWRQ1
2902Q1
2902Q1
−40°C to 125°C
7 mV
32 V
SOIC (D)
TSSOP (PW)
Reel of 2500
Reel of 2000
LM2902KVQDRQ1
LM2902KVQPWRQ1
2902KVQ
2902KVQ
2 mV
32 V
SOIC (D)
TSSOP (PW)
Reel of 2500
Reel of 2000
LM2902KAVQDRQ1 2902KAQ
LM2902KAVQPWRQ1 2902KAQ
‡ _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at}
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004 Texas Instruments Incorporated
1