LM2901Q1 Datasheet, PDF (1/12 Pages) Texas Instruments – QUADRUPLE DIFFERENTIAL COMPARATOR

LM2901-Q1, LM2901AV-Q1, LM2901V-Q1
QUADRUPLE DIFFERENTIAL COMPARATOR
D Qualified for Automotive Applications
D Single Supply or Dual Supplies
D Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
D Low Input Bias Current . . . 25 nA Typ
D Low Input Offset Current . . . 2 nA Typ
D Low Input Offset Voltage . . . 2 mV Typ
D Common-Mode Input Voltage Range
Includes Ground
D Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
D Low Output Saturation Voltage
D Output Compatible With TTL, MOS, and
CMOS
D For Single Version in SOT23-5, See TL331
SLCS142D − DECEMBER 2003 − REVISED APRIL 2008
D OR PW PACKAGE
(TOP VIEW)
1OUT 1
2OUT 2
V_CC 3
2IN− 4
2IN+ 5
1IN− 6
1IN+ 7
14 OUT3
13 OUT4
12 GND
11 4IN+
10 4IN−
9 3IN+
8 3IN−
description/ordering information
This device consists of four independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies is possible, as long as the difference
between the two supplies is 2 V to 36 V, and V_CC is at least 1.5 V more positive than the input common-mode
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other
open-collector outputs to achieve wired-AND relationships.
ORDERING INFORMATION^{
T_A
V_IOmax
AT 25°C
−40°C to 125°C 7 mV
MAX
V_CC
30 V
PACKAGE^‡
SOIC (D)
TSSOP (PW)
Reel of 2500
Reel of 2000
ORDERABLE
PART NUMBER
LM2901QDRQ1
LM2901QPWRQ1
TOP-SIDE
MARKING
2901Q1
2901Q1
−40°C to 125°C 7 mV
32 V
SOIC (D)
TSSOP (PW)
Reel of 2500 LM2901VQDRQ1
Reel of 2000 LM2901VQPWRQ1
2901VQ1
2901VQ1
−40°C to 125°C 2 mV
32 V
SOIC (D)
TSSOP (PW)
Reel of 2500
Reel of 2000
LM2901AVQDRQ1
LM2901AVQPWRQ1
2901AVQ
2901AVQ
† _{For the most current package and ordering information, see the Package Option Addendum at the end of this document,}
or see the TI web site at http://www.ti.com.
‡ _{Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.}
symbol (each comparator)
IN+
OUT
IN−
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2008, Texas Instruments Incorporated
1