ISO7841_15 Datasheet, PDF (1/37 Pages) Texas Instruments – ISO7841 ISO7841F High-Performance, 8000 VPK Reinforced Quad-Channel Digital Isolator

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
ISO7841, ISO7841F
SLLSEM3D – NOVEMBER 2014 – REVISED DECEMBER 2015
ISO7841 ISO7841F High-Performance, 8000 V_PK Reinforced Quad-Channel Digital Isolator
1 Features
•1 Signaling Rate: Up to 100 Mbps
• Wide Supply Range: 2.25 V to 5.5 V
• 2.25 V to 5.5 V Level Translation
• Wide Temperature Range: –55°C to 125°C
• Low Power Consumption, Typical 1.7 mA per
Channel at 1 Mbps
• Low Propagation Delay: 11 ns Typical
(5 V Supplies)
• Industry leading CMT(Min): ±100 kV/μs
• Robust Electromagnetic Compatibility (EMC)
• System-Level ESD, EFT, and Surge Immunity
• Low Emissions
• Isolation Barrier Life: >25 Years
• Wide Body SOIC-16 Package and Extra-Wide
Body SOIC-16 Package Options
• Safety and Regulatory Approvals:
– 8000 V_PK Reinforced Isolation per DIN V VDE
V 0884-10 (VDE V 0884-10):2006-12
– 5.7 kV_RMS Isolation for 1 Minute per UL 1577
– CSA Component Acceptance Notice 5A, IEC
60950-1, IEC 60601-1 and IEC 61010-1 End
Equipment Standards
– CQC Certification per GB4943.1-2011
– DW Package Certifications Complete; DWW
Certifications Planned
2 Applications
• Industrial Automation
• Motor Control
• Power Supplies
• Solar Inverters
• Medical Equipment
• Hybrid Electric Vehicles
3 Description
The ISO7841 is a high-performance, quad-channel
digital isolator with 8000 V_PK isolation voltage. This
device has reinforced isolation certifications
according to VDE, CSA, and CQC. The isolator
provides high electromagnetic immunity and low
emissions at low power consumption, while isolating
CMOS or LVCMOS digital I/Os. Each isolation
channel has a logic input and output buffer separated
by silicon dioxide (SiO₂) insulation barrier. This device
comes with enable pins which can be used to put the
respective outputs in high impedance for multi-master
driving applications and to reduce power
consumption. ISO7841 has three forward and one
reverse-direction channels. If the input power or
signal is lost, default output is 'high' for the ISO7841
device and 'low' for the ISO7841F device. See Device
Functional Modes for further details. Used in
conjunction with isolated power supplies, this device
prevents noise currents on a data bus or other
circuits from entering the local ground and interfering
with or damaging sensitive circuitry. Through
innovative chip design and layout techniques,
electromagnetic compatibility of ISO7841 has been
significantly enhanced to ease system-level ESD,
EFT, Surge and Emissions compliance. ISO7841 is
available in 16-pin SOIC wide-body (DW) package
and extra-wide body (DWW) packages.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
ISO7841 /
ISO7841F
SOIC, DW (16)
Extra wide SOIC,
DWW (16)
10.30 mm × 7.50 mm
10.30 mm × 14.0 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
spacer
Simplified Schematic
V_CCI
Isolation
Capacitor
V_CCO
INx
OUTx
ENx
GNDI
GNDO
(1) V_CCI and GNDI are supply and ground connections respectively for the input channels.
(2) V_CCO and GNDO are supply and ground connections respectively for the output channels.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.