ISO7231ADWRG4 Datasheet, PDF (1/21 Pages) Texas Instruments – One Megabit per Second Triple Digital Isolators

Not Recommended for New Designs
www.ti.com
ISO7230A
ISO7231A
SLLS906C – MAY 2008 – REVISED JUNE 2011
One Megabit per Second Triple Digital Isolators
Check for Samples: ISO7230A, ISO7231A
FEATURES
1
• 1Mbps Signaling Rate
– Low Channel-to-Channel Output Skew;
2ns Maximum (5V-Operation)
– Low Pulse-Width Distortion (PWD);
10ns Maximum (5V-Operation)
• Typical 25-Year Life at Rated Working Voltage
(See Application note SLLA197 and Figure 10)
• 4000V_peak Isolation, 560V_peak V_IORM
– UL 1577, IEC 60747-5-2 (VDE 0884, Rev 2),
IE 61010-1 and CSA Approved, IEC 60950-1
• 4kV ESD Protection
• Operate With 3.3V or 5V Supplies
• High Electromagnetic Immunity
(See Application note SLLA181)
• –40°C to 125°C Operating Range
APPLICATIONS
• Industrial Fieldbus
• Computer Peripheral Interface
• Servo Control Interface
• Data Acquisition
DESCRIPTION
See the Product Notification section. The ISO7230A and ISO7231A are triple-channel digital isolators each with
multiple channel configurations and output-enable functions. These devices have logic input and output buffers
separated by TI’s silicon dioxide (SiO₂) isolation barrier. Used in conjunction with isolated power supplies, these
devices block high voltage, isolate grounds, and prevent noise currents on a data bus or other circuits from
entering the local ground and interfering with or damaging sensitive circuitry.
The ISO7230 triple-channel device has all three channels in the same direction while the ISO7231 has two
channels in one direction and one channel in opposition. These devices have an active-high output enable that
when driven to a low level, places the output in a high-impedance state.
The ISO7230A and ISO7231A have TTL input thresholds and a noise-filter at the input that prevents transient
pulses of up to 2ns in duration from being passed to the output of the device.
In each device a periodic update pulse is sent across the isolation barrier to ensure the proper dc level of the
output. If this dc-refresh pulse is not received, the input is assumed to be unpowered or not being actively driven,
and the failsafe circuit drives the output to a logic high state. (Contact TI for a logic low failsafe option).
These devices require two supply voltages of 3.3V, 5V, or any combination. All inputs are 5V tolerant when
supplied from a 3.3V supply and all outputs are 4mA CMOS. These devices are characterized for operation over
the ambient temperature range of –40°C to 125°C.
V_CC1
GND1
IN_A
IN_B
IN_C
NC
NC
GND1
ISO7230
DW PACKAGE
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
V_CC2
GND2
OUT_A
OUT_B
OUT_C
NC
EN
GND2
V_CC1
GND1
IN_A
IN_B
OUT_C
NC
EN₁
GND1
ISO7231
DW PACKAGE
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
V_CC2
GND2
OUT_A
OUT_B
IN_C
NC
EN₂
GND2
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2011, Texas Instruments Incorporated