ISO1050_101 Datasheet, PDF (1/24 Pages) Texas Instruments – ISOLATED CAN TRANSCEIVER

ISO1050
www.ti.com
ISOLATED CAN TRANSCEIVER
Check for Samples: ISO1050
SLLS983C – JUNE 2009 – REVISED JULY 2010
FEATURES
1
•2 5000-V_RMS Isolation (DW Package)
• 2500-V_RMS Isolation (DUB Package)
• Failsafe Outputs
• Low Loop Delay: 150 ns Typical
• 50 kV/ms Typical Transient Immunity
• Meets or Exceeds ISO 11898 requirements
• Bus-Fault Protection of –27 V to 40 V
• Dominant Time-Out Function
• IEC 60747-5-2 (VDE 0884, Rev. 2) & IEC
61010-1 Approved
• UL 1577, IEC 60950-1 and CSA Approvals
Pending
• 3.3-V Inputs are 5-V Tolerant
• Typical 25-Year Life at Rated Working Voltage
(see Application Report SLLA197 and
Figure 15)
APPLICATIONS
• CAN Data Buses
• Industrial Automation
– DeviceNet Data Buses
– CANopen Data Buses
– CANKingdom Data Buses
• Medical Scanning and Imaging
• Security Systems
• Telecom Base Station Status and Control
• HVAC
• Building Automation
DESCRIPTION
The ISO1050 is a galvanically isolated CAN transceiver that meets or exceeds the specifications of the ISO
11898 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO₂) insulation
barrier that provides galvanic isolation of up to 5000 V_RMS for DW Package and 2500 V_RMS for DUB package.
Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other
circuits from entering the local ground and interfering with or damaging sensitive circuitry.
As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive
capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). Designed for operation in
especially harsh environments, the device features cross-wire, overvoltage and loss of ground protection from
–27 V to 40 V and over-temperature shut-down, as well as –12 V to 12 V common-mode range.
The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.
DW PACKAGE
FUNCTION DIAGRAM
DUB PACKAGE
Vcc1 1
GND1 2
RXD 3
nc 4
nc 5
TXD 6
GND1 7
GND1 8
16 Vcc2
15 GND2
14 nc
13 CANH
12 CANL
11 nc
10 GND2
9 GND2
RXD
TXD
Vcc1 1
RXD 2
TXD 3
CANH GND1 4
CANL
8 ^Vcc2
7 CANH
6 CANL
5 GND2
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
DeviceNet is a trademark of others.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated