INA226-Q1_15 Datasheet, PDF (1/38 Pages) Texas Instruments – INA226-Q1 Automotive Grade, 36-V, Bi-Directional, Zero-Drift, High Accuracy, Low- orHigh-Side, I2C Compatible Current/Power Monitor with Programmable Over-Current Alert

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
INA226-Q1
SBOS743 – JULY 2015
INA226-Q1 Automotive Grade, 36-V, Bi-Directional, Zero-Drift, High Accuracy, Low- or
High-Side, I²C Compatible Current/Power Monitor with Programmable Over-Current Alert
1 Features
•1 AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to 125°C
– Device HBM ESD Classification 2
– Device CDM ESD Classification C4B
• Senses Bus Voltages From 0 V to 36 V
• High-Side or Low-Side Sensing
• Reports Current, Voltage, and Power
• High Accuracy:
– 0.1% Gain Error (Max)
– 10 μV Offset (Max)
• Configurable Averaging Options
• 16 Programmable Addresses
• Operates from 2.7-V to 5.5-V Power Supply
• 10-Pin, DGS (VSSOP) Package
2 Applications
• HEV/EV Battery Management
• Body Control Modules
• Automatic Lock Motor Control
• Automatic Window Motor Control
• Valve Control
3 Description
The INA226-Q1 is a current shunt and power monitor
with an I²C™- or SMBUS-compatible interface. The
device monitors both a shunt voltage drop and bus
supply voltage. Programmable calibration value,
conversion times, and averaging, combined with an
internal multiplier, enable direct readouts of current in
amperes and power in watts.
The INA226-Q1 senses current on common-mode
bus voltages that can vary from 0 V to 36 V,
independent of the supply voltage. The device
operates from a single 2.7-V to 5.5-V supply, drawing
a typical of 330 μA of supply current. The device is
specified over the operating temperature range
between –40°C and 125°C and features up to 16
programmable addresses on the I²C-compatible
interface.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
INA226-Q1
VSSOP (10)
3.00 mm x 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
High-Side or Low-Side Sensing Application
Power Supply
(0 V to 36 V)
C_BYPASS
0.1 mF
High-
Side
Shunt
Load
Low-
Side
Shunt
VBUS
V
V_IN+
V_IN–
I
ADC
´
Power Register
Current Register
Voltage Register
Alert Register
VS
(Supply Voltage)
SDA
SCL
2
I C or SMBus
Compatible
Interface
Alert
A0
A1
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.