INA210_15 Datasheet, PDF (1/37 Pages) Texas Instruments – INA21x Voltage Output, Low- or High-Side Measurement, Bidirectional, Zero-Drift Series, Current-Shunt Monitors

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
INA210, INA211, INA212, INA213, INA214, INA215
SBOS437G – MAY 2008 – REVISED JULY 2014
INA21x Voltage Output, Low- or High-Side Measurement, Bidirectional,
Zero-Drift Series, Current-Shunt Monitors
1 Features
•1 Wide Common-Mode Range: –0.3 V to 26 V
• Offset Voltage: ±35 μV (Max, INA210)
(Enables Shunt Drops of 10-mV Full-Scale)
• Accuracy:
– ±1% Gain Error (Max over Temperature)
– 0.5-μV/°C Offset Drift (Max)
– 10-ppm/°C Gain Drift (Max)
• Choice of Gains:
– INA210: 200 V/V
– INA211: 500 V/V
– INA212: 1000 V/V
– INA213: 50 V/V
– INA214: 100 V/V
– INA215: 75 V/V
• Quiescent Current: 100 μA (max)
• SC70 Package: All Models
• Thin UQFN Package: INA210, INA213, INA214
2 Applications
• Notebook Computers
• Cell Phones
• Telecom Equipment
• Power Management
• Battery Chargers
• Welding Equipment
3 Description
The INA210, INA211, INA212, INA213, INA214, and
INA215 are voltage-output, current-shunt monitors
that can sense drops across shunts at common-mode
voltages from –0.3 V to 26 V, independent of the
supply voltage. Five fixed gains are available: 50 V/V,
75 V/V, 100 V/V, 200 V/V, 500 V/V, or 1000 V/V. The
low offset of the zero-drift architecture enables
current sensing with maximum drops across the
shunt as low as 10-mV full-scale.
These devices operate from a single 2.7-V to 26-V
power supply, drawing a maximum of 100 μA of
supply current. All versions are specified over the
extended operating temperature range (–40°C to
125°C), and offered in an SC70 package. The
INA210, INA213, and INA214 are also offered in a
thin UQFN package.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
INA210
SC70 (6)
UQFN (10)
2.00 mm × 1.25 mm
1.80 mm × 1.40 mm
INA211
SC70 (6)
2.00 mm × 1.25 mm
INA212
SC70 (6)
2.00 mm × 1.25 mm
INA213
SC70 (6)
UQFN (10)
2.00 mm × 1.25 mm
1.80 mm × 1.40 mm
INA214
SC70 (6)
UQFN (10)
2.00 mm × 1.25 mm
1.80 mm × 1.40 mm
INA215
SC70 (6)
2.00 mm × 1.25 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Reference
Voltage
Supply
Simplified Schematic
R_SHUNT
Load
REF
GND
INA21x
OUT
R₁
R_{3 IN-}
Output
2.7 V to 26 V
V+
C_BYPASS
0.01 mF
to
0.1 mF
R₂
SC70
IN+
R₄
PRODUCT
INA210
INA211
INA212
INA213
INA214
INA215
GAIN
200
500
1000
50
100
75
R₃ and R₄
5 kW
2 kW
1 kW
20 kW
10 kW
13.3 kW
R₁ and R₂
1 MW
1 MW
1 MW
1 MW
1 MW
1 MW
V_OUT = (I_LOAD ´ R_SHUNT) Gain + V_REF
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.