DS34C86TMX Datasheet, PDF (1/13 Pages) Texas Instruments – DS34C86T Quad CMOS Differential Line Receiver

DS34C86T
www.ti.com
SNLS379C – MAY 1998 – REVISED APRIL 2013
DS34C86T Quad CMOS Differential Line Receiver
Check for Samples: DS34C86T
FEATURES
1
•2 CMOS Design for Low Power
• ±0.2V Sensitivity Over the Input Common
Mode Voltage Range
• Typical Propagation Delays: 19 ns
• Typical Input Hysteresis: 60 mV
• Inputs Won't Load Line when V_CC = 0V
• Meets the Requirements of EIA Standard RS-
422
• TRI-STATE Outputs for System Bus
Compatibility
• Available in Surface Mount
• Open Input Failsafe Feature, Output High for
Open Input
DESCRIPTION
The DS34C86T is a quad differential line receiver
designed to meet the RS-422, RS-423, and Federal
Standards 1020 and 1030 for balanced and
unbalanced digital data transmission, while retaining
the low power characteristics of CMOS.
The DS34C86T has an input sensitivity of 200 mV
over the common mode input voltage range of ±7V.
Hysteresis is provided to improve noise margin and
discourage output instability for slowly changing input
waveforms.
The DS34C86T features internal pull-up and pull-
down resistors which prevent output oscillation on
unused channels.
Separate enable pins allow independent control of
receiver pairs. The TRI-STATE outputs have 6 mA
source and sink capability. The DS34C86T is pin
compatible with the DS3486.
Logic Diagram
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated