DS10CP152QMA Datasheet, PDF (1/15 Pages) Texas Instruments – DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch

DS10CP152Q
www.ti.com
SNLS295E – MAY 2008 – REVISED APRIL 2013
DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch
Check for Samples: DS10CP152Q
FEATURES
1
•2 AECQ-100 Grade 3
• DC - 1.5 Gbps Low Jitter, Low Skew, Low
Power Operation
• Pin Configurable, Fully Differential, Non-
Blocking Architecture
• Wide Input Common Mode Voltage Range
Allows DC-Coupled Interface to LVDS, CML
and LVPECL Drivers
• On-Chip 100Ω Input and Output Termination
Minimizes Insertion and Return Losses,
Reduces Component Count and Minimizes
Board Space
• 8 kV ESD on LVDS I/O Pins Protects Adjoining
Components
• Small SOIC-16 Space Saving Package
DESCRIPTION
The DS10CP152Q is a 1.5 Gbps 2x2 LVDS
crosspoint switch optimized for high-speed signal
routing and switching over lossy FR-4 printed circuit
board backplanes and balanced cables. Fully
differential signal paths ensure exceptional signal
integrity and noise immunity. The non-blocking
architecture allows connections of any input to any
output or outputs.
Wide input common mode range allows the switch to
accept signals with LVDS, CML and LVPECL levels;
the output levels are LVDS. A very small package
footprint requires a minimal space on the board while
the flow-through pinout allows easy board layout.
Each differential input and output is internally
terminated with a 100Ω resistor to lower device return
losses, reduce component count and further minimize
board space.
APPLICATIONS
• Automotive Display Applications
• Clock and Data Buffering and Muxing
• SD/HD SDI Routers
Typical Application
Navigation
Computer
RED
GREEN
BLUE
24 TO 1
DS90UR241Q
DS10CP152Q
SEL0
1 TO 24
RED
GREEN
BLUE
DS90UR124Q
Entertainment
System
RED
GREEN
BLUE
24 TO 1
DS90UR241Q
SEL1
2x2 CROSSPOINT
1 TO 24
RED
GREEN
BLUE
DS90UR124Q
MONITOR
1
MONITOR
2
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated