CY74FCT191T Datasheet, PDF (1/6 Pages) Texas Instruments – 4-Bit Up/Down Binary Counter

Data sheet acquired from Cypress Semiconductor Corporation.
Data sheet modified to remove devices not offered.
CY74FCT191T
SCCS016 - May 1994 - Revised February 2000
Features
• Function, pinout, and drive compatible with FCT and F
logic
• FCT-C speed at 6.2 ns max,
FCT-A speed at 7.8 ns max.
• Reduced V_OH (typically = 3.3V) versions of equivalent
FCT functions
• Edge-rate control circuitry for significantly improved
noise characteristics
• Power-off disable permits live insertion
• ESD > 2000V
• Matched rise and fall times
• Sink current
Source current
64 mA
32 mA
Logic Block Diagram
CP U/D
P₀
CE
P₁
P₂
4-Bit Up/Down Binary Counter
Functional Description
The FCT191T is a reversible modulo-16 binary counter,
featuring synchronous counting and asynchronous presetting.
The preset allows the FCT191T to be used in programmable
dividers. The count enable input, terminal count output, and ripple
clock output make possible a variety of methods of implementing
multiusage counters. In the counting modes, state changes are
initiated by the rising edge of the clock.
The outputs are designed with a power-off disable feature to
allow for live insertion of boards.
Pin Configurations
P₃
PL
SOIC/QSOP
Top View
P₁ 1
Q_{1 2}
Q₀ 3
CE 4
U/D ₅
Q_{2 6}
Q_{3 7}
GND ₈
16 VCC
15 P₀
14 CP
13 RC
12 TC
11 ^PL
10 P2
9 P3
J CLOCK K
PRESET
CLEAR
Q
Q
J CLOCK K
PRESET
CLEAR
Q
Q
J CLOCK K
PRESET
CLEAR
Q
Q
J CLOCK K
PRESET
CLEAR
Q
Q
RC TC
Q₀
Q₁
Q₂
Q₃
Pin Description
Name
Description
CE
Count Enable Input (Active LOW)
CP
Clock Pulse Input (Active Rising Edge)
P
Parallel Data Inputs
PL
Asynchronous Parallel Load Input (Active LOW)
U/D
Up/Down Count Control Input
Q
Flip-Flop Outputs
RC
Ripple Clock Output (Active LOW)
TC
Terminal Count Output
RC Function Table^[1]
Inputs
CE
CP
L
H
X
X
X
Outputs
T^[2]
RC
H
X
H
L
H
Copyright © 2000, Texas Instruments Incorporated