CDCVF2310 Datasheet, PDF (1/11 Pages) Texas Instruments – 2.5-V TO 3.3-V HIGH-PERFORMANCE CLOCK BUFFER

www.ti.com
CDCVF2310
SCAS666B – JUNE 2001 – REVISED JANUARY 2004
2.5-V TO 3.3-V HIGH-PERFORMANCE CLOCK BUFFER
• High-Performance 1:10 Clock Driver for
General-Purpose Applications. Operates up to
200 MHz at V_DD 3.3 V
• Pin-to-Pin Skew < 100 ps at V_DD 3.3 V
• V_DD Range: 2.3 V to 3.6 V
• Operating Temperature Range –40°C to 85°C
• Output Enable Glitch Suppression
• Distributes One Clock Input to Two Banks of
Five Outputs
• 25-Ω On-Chip Series Damping Resistors
• Packaged in 24-Pin TSSOP
GND
V_DD
1Y0
1Y1
1Y2
GND
GND
1Y3
1Y4
V_DD
1G
2Y4
PW PACKAGE
(TOP VIEW)
1
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
9
16
10
15
11
14
12
13
CLK
V_DD
V_DD
2Y0
2Y1
GND
GND
2Y2
2Y3
V_DD
V_DD
2G
DESCRIPTION
The CDCVF2310 is a high-performance, low-skew clock buffer that operates up to 200 MHz. Two banks of five
outputs each provide low-skew copies of CLK. After power up, the default state of the outputs is low regardless
of the state of the control pins. For normal operation, the outputs of bank 1Y[0:4] or 2Y[0:4] can be placed in a
low state when the control pins (1G or 2G, respectively) are held low and a negative clock edge is detected on
the CLK input. The outputs of bank 1Y[0:4] or 2Y[0:4] can be switched into the buffer mode when the control pins
(1G and 2G) are held high and a negative clock edge is detected on the CLK input. The device operates in a
2.5-V and 3.3-V environment. The built-in output enable glitch suppression ensures a synchronized output enable
sequence to distribute full period clock signals.
The CDCVF2310 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2001–2004, Texas Instruments Incorporated