CDCM1802 Datasheet, PDF (1/22 Pages) Texas Instruments – CLOCK BUFFER WITH PROGRAMMABLE DIVIDER, LVPECL I/O + ADDITIONAL LVCMOS OUTPUT

CDCM1802
CLOCK BUFFER WITH PROGRAMMABLE DIVIDER,
LVPECL I/O + ADDITIONAL LVCMOS OUTPUT
SCAS759 − APRIL 2004
D Distributes One Differential Clock Input to
One LVPECL Differential Clock Output and
One LVCMOS Single-Ended Output
D Programmable Output Divider for Both
LVPECL and LVCMOS Outputs
D 1.6-ns Output Skew Between LVCMOS and
LVPECL Transitions Minimizing Noise
D 3.3-V Power Supply (2.5-V Functional)
D Signaling Rate Up to 800-MHz LVPECL and
200-MHz LVCMOS
D Differential Input Stage for Wide
Common-Mode Range Also Provides VBB
Bias Voltage Output for Single-Ended Input
Signals
D Receiver Input Threshold ±75 mV
D 16-Pin QFN Package (3 mm x 3 mm)
QFN PACKAGE
(TOP VIEW)
V_DDPECL 1
IN 2
IN 3
VBB 4
12 _VDD0
11 Y0
10 Y0
9 _VDD0
description
The CDCM1802 clock driver distributes one pair of differential clock input to one LVPECL differential clock
output pair Y0 and Y0 and one single-ended LVCMOS output Y1. It is specifically designed for driving 50-Ω
transmission lines. The LVCMOS output is delayed by 1.6 ns over the PECL output stage to minimize noise
impact during signal transitions.
The CDCM1802 has two control pins, S0 and S1, to select different output mode settings. The S[1:0] pins are
3-level inputs. Additionally, an enable pin EN is provided to disable or enable all outputs simultaneously. The
CDCM1802 is characterized for operation from −40°C to 85°C.
For single-ended driver applications, the CDCM1802 provides a VBB output pin that can be directly connected
to the unused input as a common-mode voltage reference.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1