CC1110FX Datasheet, PDF (1/243 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory, Sub-1 GHz RF Transceiver, and USB Controller

CC1110Fx / CC1111Fx
Low-Power SoC (System-on-Chip) with MCU, Memory,
Sub-1 GHz RF Transceiver, and USB Controller
Applications
• Low-power SoC wireless applications
operating in the 315/433/868/915 MHz
ISM/SRD bands
• Wireless alarm and security systems
• Industrial monitoring and control
• Wireless sensor networks
Product Description
The CC1110Fx/CC1111Fx is a true low-power sub-
1 GHz system-on-chip (SoC) designed for low-
power wireless applications. The
CC1110Fx/CC1111Fx combines the excellent
performance of the state-of-the-art RF
transceiver CC1101 with an industry-standard
enhanced 8051 MCU, up to 32 kB of in-system
programmable flash memory and up to 4 kB of
RAM, and many other powerful features. The
small 6x6 mm package makes it very suited
for applications with size limitations.
The CC1110Fx/CC1111Fx is highly suited for
systems where very low power consumption is
required. This is ensured by several advanced
low-power operating modes. The CC1111Fx adds
a full-speed USB 2.0 interface to the feature
set of the CC1110Fx. Interfacing to a PC using
the USB interface is quick and easy, and the
high data rate (12 Mbps) of the USB interface
avoids the bottlenecks of RS-232 or low-speed
USB interfaces.
Key Features
• Radio
o High-performance RF transceiver based on
the market-leading CC1101
o Excellent receiver selectivity and blocking
performance
o High sensitivity (−110 dBm at 1.2 kBaud)
o Programmable data rate up to 500 kBaud
o Programmable output power up to 10 dBm
for all supported frequencies
o Frequency range: 300 - 348 MHz, 391 - 464
MHz and 782 - 928 MHz
o Digital RSSI / LQI support
• Low Power
o Low current consumption (RX: 16.2 mA @
1.2 kBaud, TX: 15.2 mA @ −6 dBm output
power)
o 0.3 µA in PM3 (operating mode with the
lowest power consumption, only external
interrupt wakeup)
o 0.5 µA in PM2 (operating mode with the
second lowest power consumption, timer or
external interrupt wakeup)
• AMR - Automatic Meter Reading
• Home and building automation
• Low power telemetry
• CC1111Fx: USB dongles
DIGITAL
ANALOG
MIXED
RESET_N
XOSC_Q2
XOSC_Q1
P2_4
P2_3
P2_2
P2_1
P2_0
P1_7
P1_6
P1_5
P1_4
P1_3
P1_2
P1_1
P1_0
P0_7
P0_6
P0_5
P0_4
P0_3
P0_2
P0_1
P0_0
DP
DM
VDD (2.0 - 3.6 V)
DCOUPL
RF_P RF_N
• MCU, Memory, and Peripherals
o High performance and low power 8051
microcontroller core.
o Powerful DMA functionality
o 8/16/32 KB in-system programmable flash,
and 1/2/4 KB RAM
o Full-Speed USB Controller with 1 KB FIFO
(CC1111Fx )
o 128-bit AES security coprocessor
o 7 - 12 bit ADC with up to eight inputs
o I²S interface
o Two USARTs
o 16-bit timer with DSM mode
o Three 8-bit timers
o Hardware debug support
o 21 (CC1110Fx ) or 19 (CC1111Fx ) GPIO pins
o SW compatible with CC2510Fx/CC2511Fx
• General
o Wide supply voltage range (2.0V - 3.6V)
o RoHS compliant 6x6 mm QLP36 package
SWRS033F
Page 1 of 242