CC1070_12 Datasheet, PDF (1/57 Pages) Texas Instruments – Single Chip Low Power RF Transmitter for Narrowband Systems

CC1070
CC1070 Single Chip Low Power RF Transmitter for Narrowband Systems
Applications
• Narrowband low power UHF wireless
data transmitters
• 402 / 424 / 426 / 429 / 433 / 447 / 449 /
469 / 868 and 915 MHz ISM/SRD
band systems
• TPMS – Tire Pressure Monitoring
Systems
• AMR – Automatic Meter Reading
• Wireless alarm and security systems
• Home automation
• Low power telemetry
Product Description
CC1070 is a true single-chip UHF
transmitter designed for very low power
and very low voltage wireless applications.
The circuit is mainly intended for the ISM
(Industrial, Scientific and Medical) and
SRD (Short Range Device) frequency
bands at 402, 424, 426, 429, 433, 447,
449, 469, 868 and 915 MHz, but can
easily be programmed for multi-channel
operation at other frequencies in the 402 -
470 and 804 - 940 MHz range.
The CC1070 is especially suited for narrow-
band systems with channel spacings of
12.5 or 25 kHz complying with ARIB STD
T-67 and EN 300 220.
The CC1070 main operating parameters
can be programmed via a serial bus, thus
making CC1070 a very flexible and easy to
use transmitter. In a typical application
Features
• True single chip UHF RF transmitter
• Frequency range 402 - 470 MHz and
804 - 940 MHz
• Programmable output power
• Low supply voltage (2.3 to 3.6 V)
• Very few external components required
• Small size (QFN 20 package)
• Pb-free package
• Data rate up to 153.6 kBaud
• OOK, FSK and GFSK data modulation
• Fully on-chip VCO
CC1070 will be used together with a
microcontroller and a few external passive
components.
• Programmable frequency makes
crystal temperature drift compensation
possible without TCXO
• Suitable for frequency hopping systems
• Suited for systems targeting
compliance with EN 300 220, FCC
CFR47 part 15 and ARIB STD T-67
• Development kit available
• Easy-to-use software for generating the
CC1070 configuration data
SWRS043A
Page 1 of 54