AM26LV31C_08 Datasheet, PDF (1/15 Pages) Texas Instruments – LOW-VOLTAGE HIGH-SPEED QUADRUPLE DIFFERENTIAL LINE DRIVERS

www.ti.com
AM26LV31C, AM26LV31I
LOW-VOLTAGE HIGH-SPEED QUADRUPLE DIFFERENTIAL LINE DRIVERS
SLLS201G – MAY 1995 – REVISED MAY 2005
FEATURES
• Switching Rates up to 32 MHz
• Operate From a Single 3.3-V Supply
• Propagation Delay Time . . . 8 ns Typ
• Pulse Skew Time . . . 500 ps Typ
• High Output-Drive Current . . . ±30 mA
• Controlled Rise and Fall Times . . . 3 ns Typ
• Differential Output Voltage With 100-Ω
Load . . . 1.5 V Typ
• Ultra-Low Power Dissipation
– dc, 0.3 mW Max
– 32 MHz All Channels (No Load), 385 mW Typ
• Accept 5-V Logic Inputs With 3.3-V Supply
• Low-Voltage Pin-to-Pin Compatible
Replacement for AM26C31, AM26LS31, MB571
• High Output Impedance in Power-Off
Condition
• Driver Output Short-Protection Circuit
• Package Options Include Plastic
Small-Outline (D, NS) Packages
D OR NS PACKAGE
(TOP VIEW)
1A 1
1Y 2
1Z 3
G4
2Z 5
2Y 6
2A 7
GND 8
16 V_CC
15 4A
14 4Y
13 4Z
12 G
11 3Z
10 3Y
9 3A
DESCRIPTION/ORDERING INFORMATION
The AM26LV31C and AM26LV31I are BiCMOS quadruple differential line drivers with 3-state outputs. They are
designed to be similar to TIA/EIA-422-B and ITU Recommendation V.11 drivers with reduced supply-voltage
range.
The devices are optimized for balanced-bus transmission at switching rates up to 32 MHz. The outputs have very
high current capability for driving balanced lines such as twisted-pair transmission lines and provide a high
impedance in the power-off condition. The enable function is common to all four drivers and offers the choice of
active-high or active-low enable inputs. The AM26LV31C and AM26LV31I are designed using Texas Instruments
proprietary LinIMPACT-C60™ technology, facilitating ultra-low power consumption without sacrificing speed.
These devices offer optimum performance when used with the AM26LV32 quadruple line receivers.
The AM26LV31C is characterized for operation from 0°C to 70°C. The AM26LV31I is characterized for operation
from –45°C to 85°C
T_A
0°C to 70°C
–45°C to 85°C
ORDERING INFORMATION
PACKAGE ⁽¹⁾
ORDERABLE PART NUMBER
SOIC – D
Tape and reel
AM26LV31CD
AM26LV31CDR
SOIC – NS
Tape and reel
AM26LV31CNS
AM26LV31CNSR
SOIC – D
Tape and reel
AM26LV31ID
AM26LV31IDR
SOIC – NS
Tape and reel
AM26LV31INS
AM26LV31INSR
TOP-SIDE MARKING
AM26LV31C
26LV31
AM26LV31I
26LV31I
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinIMPACT-C60 is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1995–2005, Texas Instruments Incorporated