ADT7301 Datasheet, PDF (1/16 Pages) Analog Devices – 13-Bit, 0.5C Accurate, MicroPower Digital Temperature Sensor in 6-Lead SOT-23

FEATURES
13-bit temperature-to-digital converter
−40°C to +150°C operating temperature range
±0.5°C typical accuracy
0.03125°C temperature resolution
Shutdown current of 1 μA
Power dissipation of 0.631 mW at VDD = 3.3 V
SPI- and DSP-compatible serial interface
Shutdown mode
Space-saving SOT-23 and MSOP packages
Compatible with AD7814
APPLICATIONS
Medical equipment
Automotive
Environmental controls
Oil temperature
Hydraulic systems
Cellular phones
Hard disk drives
Personal computers
Electronic test equipment
Office equipment
Domestic appliances
Process control
GENERAL DESCRIPTION
The ADT7301 is a complete temperature monitoring system
available in SOT-23 and MSOP packages. It contains a band gap
temperature sensor and a 13-bit ADC to monitor and digitize
the temperature reading to a resolution of 0.03125°C.
The ADT7301 has a flexible serial interface that allows easy
interfacing to most microcontrollers. The interface is compati-
ble with SPI®, QSPI™, and MICROWIRE™ protocols as well as
DSPs. The part features a standby mode that is controlled via
the serial interface. The ADT7301’s wide supply voltage range,
low supply current, and SPI-compatible interface make it ideal
for a variety of applications including personal computers,
office equipment, automotive, and domestic appliances. The
ADT7301 is rated for operation over the −40°C to +150°C
temperature range. It is not recommended to operate the device
at temperatures above +125°C for greater than a total of 5%
(5,000 hours) of the lifetime of the device. Exposure beyond this
limit affects device reliability.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
±1°C Accurate, 13-Bit,
Digital Temperature Sensor
ADT7301
FUNCTIONAL BLOCK DIAGRAM
GND
BAND GAP
TEMPERATURE
SENSOR
ADT7301
13-BIT
ANALOG/DIGITAL
CONVERTER
TEMPERATURE
VALUE
REGISTER
SERIAL
BUS
INTERFACE
Figure 1.
V_DD
CS
SCLK
DIN
DOUT
PRODUCT HIGHLIGHTS
1. On-chip temperature sensor that allows an accurate
measurement of the ambient temperature. The measurable
temperature range is −40°C to +150°C.
2. Supply voltage of 2.7 V to 5.25 V.
3. Space-saving 6-lead SOT-23 and 8-lead MSOP packages.
4. Typical temperature accuracy of ±0.5°C.
5. 13-bit temperature reading to 0.03125°C resolution.
6. Shutdown mode that reduces the power consumption to
4.88 μW with VDD = 3.3 V @ 1 SPS.
7. Compatible with AD7814.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2005–2011 Analog Devices, Inc. All rights reserved.