English
Language : 

ADS58H43 Datasheet, PDF (1/58 Pages) Texas Instruments – Quad-Channel, 250-MSPS Receiver and Feedback ADC
ADS58H43
www.ti.com
SBAS598 – NOVEMBER 2012
Quad-Channel, 250-MSPS Receiver and Feedback ADC
Check for Samples: ADS58H43
FEATURES
1
•2 Quad Channel
• Three Different Operating Modes:
– 11-Bit: 250 MSPS
– 11-Bit SNRBoost3G+: 250 MSPS
– 14-Bit: 250 MSPS (Burst Mode)
• Maximum Sampling Data Rate: 250 MSPS
• Power Dissipation:
– 11-Bit Mode: 365 mW per Channel
• SNRBoost3G+ Bandwidth: 2x 45 MHz or 90 MHz
• Spectral Performance at 170 MHz IF (typ):
– SNR: 70.5 dBFS in 90-MHz Band with
SNRBoost3G+
– SFDR: 85 dBc
• DDR LVDS Digital Output Interface
• 144-Pad BGA (10-mm × 10-mm)
DESCRIPTION
The ADS58H43 is a high-linearity, quad-channel, 14-
bit, 250-MSPS analog-to-digital converter (ADC). The
four ADC channels are separated into two blocks with
two ADCs each. Each block can be individually
configured into three different operating modes. One
operating mode includes the implementation of the
SNRBoost3G+ signal processing technology to provide
high signal-to-noise ratio (SNR) in a band up to
90 MHz wide with only 11-bit resolution. Designed for
low power consumption and high spurious-free
dynamic range (SFDR), the ADC has low-noise
performance and outstanding SFDR over a large
input frequency range.
APPLICATIONS
• Multi-Carrier GSM Cellular Infrastructure Base
Stations
• Multi-Carrier Multi-Mode Cellular Infrastructure
Base Stations
• Active Antenna Arrays for Wireless
Infrastructures
• Communications Test Equipment
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated