5962-9091402QYA Datasheet, PDF (1/15 Pages) Texas Instruments – LM185QML Adjustable Micropower Voltage References

LM185QML
www.ti.com
SNVS386D – NOVEMBER 2005 – REVISED MARCH 2013
LM185QML Adjustable Micropower Voltage References
Check for Samples: LM185QML
FEATURES
1
•2 Adjustable from 1.24V to 5.30V
• Operating Current of 10μA to 20mA
• 1Ω Dynamic Impedance
• Low Temperature Coefficient
DESCRIPTION
The LM185 are micropower 3-terminal adjustable
band-gap voltage reference diodes. Operating from
1.24 to 5.3V and over a 10μA to 20mA current range,
they feature exceptionally low dynamic impedance
and good temperature stability. On-chip trimming is
used to provide tight voltage tolerance. Since the
LM185 band-gap reference uses only transistors and
resistors, low noise and good long-term stability
result.
Careful design of the LM185 has made the device
tolerant of capacitive loading, making it easy to use in
almost any reference application. The wide dynamic
operating range allows its use with widely varying
supplies with excellent regulation.
The extremely low power drain of the LM185 makes it
useful for micropower circuitry. This voltage reference
can be used to make portable meters, regulators or
general purpose analog circuitry with battery life
approaching shelf life. Further, the wide operating
current allows it to replace older references with a
tighter tolerance part.
Connection Diagrams
Figure 1. PFM Metal Can Package (Bottom View)
See Package Number NDV0003H
Figure 2. 20-Leadless Chip Carrier (Top View)
See Package Number NAJ0020A
N/C 1
N/C 2
N/C 3
N/C 4
V- 5
10
+V_REF
9
N/C
8
N/C
7
ADJ
6
N/C
Figure 3. 10-Lead CLGA (Top View)
See Package Number NAC0010A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated