5962-87552012A Datasheet, PDF (1/22 Pages) Texas Instruments – OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

D 2-V to 6-V V_CC Operation
D Inputs Accept Voltages to 6 V
D Max t_pd of 7.5 ns at 5 V
description/ordering information
These octal buffers and line drivers are designed
specifically to improve the performance and
density of 3-state memory address drivers, clock
drivers, and bus-oriented receivers and
transmitters.
The ’AC244 devices are organized as two 4-bit
buffers/drivers with separate output-enable (OE)
inputs. When OE is low, the device passes
noninverted data from the A inputs to the Y
outputs. When OE is high, the outputs are in the
high-impedance state.
To ensure the high-impedance state during power
up or power down, OE should be tied to V_CC
through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking
capability of the driver.
SN54AC244, SN74AC244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCAS514E − JUNE 1995 − REVISED OCTOBER 2003
SN54AC244 . . . J OR W PACKAGE
SN74AC244 . . . DB, DW, N, NS, OR PW PACKAGE
(TOP VIEW)
1OE 1
1A1 2
2Y4 3
1A2 4
2Y3 5
1A3 6
2Y2 ⁷
1A4 ⁸
2Y1 ⁹
GND ¹⁰
20 V_CC
19 2OE
18 1Y1
17 2A4
16 1Y2
15 2A3
14 _1Y3
13 _2A2
12 _1Y4
11 _2A1
SN54AC244 . . . FK PACKAGE
(TOP VIEW)
3 2 1 20 19
1A2 4
18 1Y1
2Y3 5
17 2A4
1A3 6
16 1Y2
2Y2 7
15 2A3
1A4 8
14 1Y3
9 10 11 12 13
ORDERING INFORMATION
T_A
PACKAGE^†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP − N
Tube
SN74AC244N
SN74AC244N
SOIC − DW
Tube
Tape and reel
SN74AC244DW
SN74AC244DWR
AC244
−40°C to 85°C
SOP − NS
SSOP − DB
Tape and reel
Tape and reel
SN74AC244NSR
SN74AC244DBR
AC244
AC244
TSSOP − PW
CDIP − J
Tube
Tape and reel
Tube
SN74AC244PW
SN74AC244PWR
SNJ54AC244J
AC244
SNJ54AC244J
−55°C to 125°C CFP − W
Tube
SNJ54AC244W
SNJ54AC244W
LCCC − FK
Tube
SNJ54AC244FK
SNJ54AC244FK
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are}
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2003, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1