1P1G66QDBVRQ1 Datasheet, PDF (1/19 Pages) Texas Instruments –





SINGLE BILATERAL ANALOG SWITCH

SN74LVC1G66ĆQ1
SINGLE BILATERAL ANALOG SWITCH
D Qualified for Automotive Applications
D 1.65-V to 5.5-V V_CC Operation
D Inputs Accept Voltages to 5.5 V
D High On-Off Output Voltage Ratio
D High Degree of Linearity
D High Speed, Typically 0.5 ns
(V_CC = 3 V, C_L = 50 pF)
D Low On-State Resistance, Typically ≈5.5 Ω
(V_CC = 4.5 V)
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
SCES499D − OCTOBER 2003 − REVISED JANUARY 2008
DBV or DCK PACKAGE
(TOP VIEW)
A¹
B²
GND ³
5 V_CC
4C
description/ordering information
This single analog switch is designed for 1.65-V to 5.5-V V_CC operation.
The SN74LVC1G66 can handle both analog and digital signals. The device permits signals with amplitudes of
up to 5.5 V (peak) to be transmitted in either direction.
Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for
analog-to-digital and digital-to-analog conversion systems.
ORDERING INFORMATION^†
TA
PACKAGE‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING§
−40°C to 125°C
SOT (SOT-23) − DBV
SOT (SOT-70) − DCK
Reel of 3000
Reel of 3000
1P1G66QDBVRQ1
1P1G66QDCKRQ1
C66_
C6_
† _{For the most current package and ordering information, see the Package Option Addendum at the end of this document,}
or see the TI web site at http://www.ti.com.
‡ _{Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.}
§ _{The actual top-side marking has one additional character that designates the wafer fab/assembly site.}
FUNCTION TABLE
CONTROL
INPUT
(C)
SWITCH
L
OFF
H
ON
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range
from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage
because very small parametric changes could cause the device not to meet its published specifications.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2008, Texas Instruments Incorporated
1