H-AV-MPEG2 Datasheet, PDF (1/1 Pages) THOR communications – Our H-AV-MPEG2-D decoder units are designed for professional quality head end decoding.

Data Sheet: H-AV-MPEG2-D
Our H-AV-MPEG2-D decoder units are
designed for professional quality head
end decoding. Our units provide top of
the line MPEG-2 decoding from one of
three different input sources. The
H-AV-MPEG2-D offers support for transport streams carried over Ethernet IP (UDP), DVB-ASI, or an
optional DS3/E3. When decoding from an IP source the unit offers support for Unicast, Multicast, or
Broadcast type streams. Outputs are provided by an SD-SDI signal with embedded audio with an
optional second SD-SDI output, two component video outputs, and one S-Video output. Audio output
is provided by two 2 analog balanced stereo outputs on XLR connectors with two optional AES/EBU
outputs on BNC connectors. Our unit features integrated management provided by either SNMP or an
embedded HTTP web server for remote monitoring and control. The H-AV-MPEG2-D is an ideal
solution for all of your Broadcast quality DVB digital video decoding needs.
Typical H-AV-MPEG2-D Application
H-AV-MPEG2-E
Internet
Or WAN
RF QAM Modulator
Technical Specifications
Standards:
Transport Stream:
Remote Control:
Video Formats
Audio:
Audio Format:
Sampling Frequency:
NTSC, PAL, SECAM
ASI In, ASI Loop, RJ45 UDP
RS-232, Web Interface, Software
MPEG-2 4:2:0 MP@ML
MPEG-2 4:2:2 MP@ML Optional
2 x CVBS (one for monitoring)
2 x SD-SDI Identical with audio
2 x Analog Stereo Balanced XLR
2 x AES/EBU outputs Optional
MPEG3 Layer I and Layer II
32KHz, 44.1KHz, 48KHz
PAL
720×576, 704×576, 640×576, 544×576,
480×576, 384×576, 352×576
NTSC
720×480, 704×480, 640×480, 544×480,
480×480, 384×480, 352×480
Operating Temp:
0 – 50 (°C)
Storage Temp:
-20 – 70 (°C)
Operating Humidity:
0 – 90 (%)
Storage Humidity:
0 – 90 (%)
Power Requirements:
110/240V Auto Sense
Dimensions:
480mmX225mmX44mm
© 2013 Thor Broadcast – All rights reserved. Contact: [e-mail] 1-800-521-8467