H-8A-ENC Datasheet, PDF (1/1 Pages) THOR communications – High capacity 16 Input Analog Audio Encoder System

H-8A-ENC
8 CH STEREO AUDIO ENCODER
16 Unbalanced Audio on BNC
High capacity 16 Input Analog Audio Encoder System
Hardware encoder for converting BNC inputs to MPEG1 Layer 2 streams
ENCODE 16 INPUTS TO MPEG1 LAYER 2 AUDIO
The Thor H­8A­ENC system is an encoder
for unbalanced analog audio. The system
supports 16 mono or 8 pairs of stereo audio
inputs. Each channel is independently
controlled with independent gain controls.
Encoding is performed via the MPEG1 Layer
2 audio codec with many bit rates supported.
Once the audio is encoded, the output
streams are provided on both ASI and IP
network stream outputs in the form of an MPTS UDP feed. Control and settings can be made
either through the front panel keypad and LED display, or through a standard web browser on
a dedicated NMS Ethernet port. In addition to mirrored ASI outputs, the unit can also function
as a multiplexer with an independent ASI transport stream input. Contact a sales
representative for more information.
Product Specifications and Information Table
Encoding Parameters
Inputs
Encoding Format
Audio Gain
Sampling Rate
Bit Rates
ASI Outputs
IP Network Outputs
Physical Parameters
Power Input
Power Consumption
RF Frequency Response
Operating Temperature
16 Mono or 8 Stereo Unbalanced Analog on BNC
MPEG1 Layer 2
­20 ~ +6 dB
48 KHz
32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384 Kb/s
2x ASI Outputs on BNC (Mirrored)
MPTS Over UDP 1000M Base­T Ethernet
100 ­ 240 VAC Auto Switching
~25 W
19 x 17 x 2 In
32 ­ 110 F
Copyright 2015 Thor Broadcast
1-800-521-8467 (Phone)
[e-mail]