F-OS Datasheet, PDF (1/1 Pages) THOR communications – The F-OS optical switch is used for system redundancy and backup.

Data Sheet: F-OS
(1X1, 2X1,1X2, 2X2)
The F-OS optical switch is used for
system redundancy and backup.
With the use of an optical switch, a
redundant signal can be routed to an
active path in the event of a fault.
The F-OS optical switch features low insertion loss which is typically 0.6dB.
The unit offers three types of switching 1X1, 1x2, 2x1, or 2x2.
A front panel LCD provides system status and provides a means of programing the switch.
The F-OS can also be dynamically configured for CADM and OXC systems.
Technical Specifications
Performance
Work wavelength
Input power range
Total insertion loss
Switch loss
Splitter loss
Connector loss
Echo loss
Index
1260~1360nm,
1510~1610nm, 1310nm
-30 ~ -20dBm, -10 ~ +10dBm,
+10 ~ +30dBm
2.0dB
<1.0dB(type,≤0.8dB)
<0.5dB
<0.5dB
55 dB
Polarization dependent loss
Repeatability
Switch time
Voltage
Optical connector
Transmission power
Casing Size
© 2013 Thor Broadcast – All rights reserved. Contact: [e-mail] 1-800-521-8467
0.1dB
≤± 0.02dB
10ms
135~250 VAC
FC/APC & SC/APC
500mW
19×1.75×14.2"