English
Language : 

F-HDMI Datasheet, PDF (1/1 Pages) THOR communications – Thor F-HDMI-SMSC fiber extenders eliminate the limitations of traditional multimode or CAT5 HDMI extenders.
Data Sheet: F-HDMI
Thor F-HDMI-SMSC fiber extenders
eliminate the limitations of traditional
multimode or CAT5 HDMI extenders.
This is a complete kit with transmitter
and receiver for transparent HDMI
connections over a single strand of
SM-FOC up to 25km. Thor HDMI extenders offer full bi-directional signal transport between the
transmitter and receiver. This allows return path information from the sink back to the source for
services such as HDCP status, supported screen resolutions, Electronic display information, or any
other information sent from the sink device at the receiver back to the source device at the transmitter.
Thor also provides pre-terminated and connectorized singlemode fiber cables at any length. Thor F-
HDMI-SMSC fiber optic HDMI systems allow simple and inexpensive video links over any distance.
With 6.25Gbps transmitter optics the video data can be sent at full rate without encoding or reducing
quality. This allows video connections operating at 1080p60 at less than 10ms latency over 25km.
With such a low delay, these extender kits satisfy all live video quality and latency requirements.
Typical F-HDMI Application
Technical Specifications
Resolution:
Interface:
Audio Mode:
Input/Output
Max input/output
Frequency Response
Singal Noise Ratio
Interface
Optical Wavelength
Receiver sensitivity
Data Rate
720,1080, 800x600 to 1920x1200
HDMI Interface with HDCP
Unballenced Stereo
10k/50 Ohms Stereo
5 dBu/4Vpp Stereo
20Hz – 20kHz
>70 dB @ 1 kHz
3.5 mm
1310 nm
-23 dBm
1.65 GHz
Input Optical Modulation
Output Optical Modulation
Relative Speed
Return Wave Loss
Dimensions (mm)
Power Supply Max.
Working Temp.
Relative Humidity
© 2013 Thor Broadcast – All rights reserved. Contact: Sales@thorfiber.com 1-800-521-8467
<15 W
180 W
-116 DB/Hz
<10 dB
170x100x35
12 VDC @ 1.5 A
0 – 50
0 – 95