F-E1T1 Datasheet, PDF (1/1 Pages) THOR communications – The F-E1T1 fiber converters allow extension of a single T1 or E1 RJ45 / RJ48c 100ohms port over multi-mode or singlemode fiber

Data Sheet: F-E1T1
The F-E1T1 fiber converters allow extension of a single T1
or E1 RJ45 / RJ48c 100ohms port over multi-mode or single-
mode fiber . The standard interface for fiber optics is the
SC/APC connector. T1 interface can be framed or unframed.
The fiber converter is totally transparent to the T1 signal.
Applications include extension of smart-jacks over fiber, PBX
interconnection or T1/E1 transport .T1/E1 fiber modem
provide synchronous, full duplex, half duplex, or simplex
data transmission at 1.544 Mbps (T1) and 2.048 Mbps (E1), at distances up to 120 km with fully
transparent operation. This product supports ANSI T1.403, AT&T TR54016 and AT&T TR62411 T1
standards, and CCITT G.703, G.824, G.955 E1 standards. Several different configurations are offered
to accommodate a wide variety of fiber optic needs.
Typical F-E1T1 Application
Technical Specifications
Optical Features:
Operating Wavelength
Receiver Sensitivity
Transmitter Power
Optical Connector
T1/E1 Interface
Protocol
Data Rate
Operation
Error Rate
Data Connector
Digital Interface
850nm, 1310nm, 1550nm CWDM
-30 dBm
-3 dBm
SC/APC
AMI or B8ZS (synchronous)
1.544 Mbps(T1) / 2.048Mpbs(E1)
Full Duplex, Simplex
Better than 10^-12
RJ45/RJ48 w/ DCE/DTE
F240x(T1) ANSI T1.403 TR54016
F241x(E1) G.703, G.824, G.955
General Features:
Power Supply
Power Consumption
Operating Temp:
Storage Temp:
Operating Humidity:
Storage Humidity:
Dimensions:
© 2013 Thor Broadcast – All rights reserved. Contact: [e-mail] 1-800-521-8467
+12 V
4.0 W
-20 – 65 (°C)
-40 – 85 (°C)
0 – 90 (%)
0 – 90 (%)
130mmX106mmX33mm