U60D20D Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 60 Amperes Dual Doubler Ultra Fast Recovery Half Bridge Rectifiers

U60D20D thru U60D60D
®
U60D20D thru U60D60D
Pb
Pb Free Plating Product
60 Amperes Dual Doubler Ultra Fast Recovery Half Bridge Rectifiers
Features
Dual rectifier construction, positive center-tap
Plastic package has Underwriters Laboratory
Flammability Classification 94V0
Glass passivated chip junctions
Superfast recovery time, high voltage
Low forward voltage, high current capability
Low thermal resistance
Low power loss, high efficiency
High temperature soldering guaranteed:
260^oC, 0.16”(4.06mm)from case for 10 seconds
Mechanical Data
Cases: TO-3P/TO-247AD molded plastic
Terminals: Pure tin plated, lead free solderable per
MIL-STD-750. Method 2026
Polarity: As marked on diode body
Mounting position: Any
Mounting torque: 10in-lbs. Max.
Weight: 6.5 gram approximately
TO-3P/TO-247AD
.142(3.6)
.125(3.2)
.640(16.25)
.620(15.75)
Unit: inch (mm)
.199(5.05)
.175(4.45)
.126(3.2)
.110(2.8)
.050(1.25)
.045(1.15)
.225(5.7)
.204(5.2)
.225(5.7)
.204(5.2)
.095(2.4)
.030(0.75)
.017(0.45)
Case
Case
Case
Case
Positive
Negative
Doubler
Reverse Doubler
Common Cathode Common Anode Tandem Polarity Tandem Polarity
Suffix "C"
Suffix "A"
Suffix "D"
Suffix "S"
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values _{(not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,}
damage may occur and reliability may be affected.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol U60D20D U60D40D U60D60D Unit
V_RRM
200
400
V_RWM
V_R
600
V
Average Rectified Forward Current (Rated V_R)
Per Leg
Per Device
I_F(AV)
A
30 @ T_C = 150°C
60 @ T_C = 150°C
Peak Rectified Forward Current, Per Leg
(Rated V_R, Square Wave, 20 kHz, T_C = 150°C)
I_FRM
60 @ T_C = 150°C
60 @ T_C =145°C
A
Nonrepetitive Peak Surge Current (Surge applied at rated
load conditions, halfwave, single phase, 60 Hz) Per Leg
I_FSM
600
A
Operating Junction and Storage Temperature
T_J, T_stg
− 65 to +175
°C
THERMAL CHARACTERISTICS (Per Diode Leg)
Maximum Thermal Resistance,
− Junction−to−Case
− Junction−to−Ambient
R_qJC
R_qJA
°C/W
1.5
40
ELECTRICAL CHARACTERISTICS (Per Diode Leg)
Maximum Instantaneous Forward Voltage (Note 1)
(I_F = 30 Amp, T_C = 150°C)
(I_F = 30 Amp, T_C = 25°C)
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, T_J = 150°C)
(Rated DC Voltage, T_J = 25°C)
Maximum Reverse Recovery Time
(i_F = 1.0 A, di/dt = 50 A/ms)
V_F
0.95
1.20
1.05
1.30
i_R
5000
60
V
1.5
1.7
mA
5000
60
t_rr
35
50
ns
Rev.05
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/