U20C20D Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – Dual Doubler Tandem Ultra Fast Recovery Diodes

U20C20D thru U20C60D
®
U20C20D thru U20C60D
Pb
Pb Free Plating Product
20.0 Ampere Dual Doubler Tandem Ultra Fast Recovery Diodes
Features
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Inverters/Solar Inverters
Plating Power Supply,SMPS and UPS
Car Audio Amplifiers and Sound Device Systems
Mechanical Data
Case: Heatsink TO-220AB
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202 method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.2 gram approximately
TO-220AB
.419(10.66)
.387(9.85)
.139(3.55)
MIN
Unit : inch (mm)
.196(5.00)
.163(4.16)
.054(1.39)
.045(1.15)
.038(0.96)
.019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
Case
Positive
Common Cathode
Suffix "C"
Case
Negative
Common Anode
Suffix "A"
Case
Doubler
Tandem Polarity
Suffix "D"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL
Maximum Recurrent Peak Reverse Voltage VRRM
U20C20C
U20C20A
U20C20D
200
U20C40C
U20C40A
U20C40D
400
Maximum RMS Voltage
VRMS
140
280
Maximum DC Blocking Voltage
VDC
200
400
Maximum Average Forward Rectified
Current TC=125^oC
IF(AV)
20.0
U20C60C
U20C60A ^UNIT
U20C60D
600
V
420
V
600
V
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
200
(JEDEC method)
175
A
Maximum Instantaneous Forward Voltage
VF
0.98
@ 10.0 A
Maximum DC Reverse Current @TJ=25^oC
At Rated DC Blocking Voltage @TJ=125^oC
IR
Maximum Reverse Recovery Time (Note 1)
Trr
Typical junction Capacitance (Note 2)
CJ
120
Operating Junction and Storage
Temperature Range
TJ, TSTG
1.3
1.7
V
10.0
uA
250
uA
35
nS
70
pF
-55 to +150
o_C
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
Rev.04/2014
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/