SF3004PT Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 30.0 Ampere Dual Common Cathode Super Fast Recovery Rectifiers

SF3004PT thru SF3008PT
®
SF3004PT thru SF3008PT
Pb
Pb Free Plating Product
30.0 Ampere Dual Common Cathode Super Fast Recovery Rectifiers
Features
Dual rectifier construction, positive center-tap
Plastic package has Underwriters Laboratory
Flammability Classification 94V0
Glass passivated chip junctions
Superfast recovery time, high voltage
Low forward voltage, high current capability
Low thermal resistance
Low power loss, high efficiency
High temperature soldering guaranteed:
260^oC, 0.16”(4.06mm)from case for 10 seconds
Mechanical Data
Cases: TO-3P/TO-247AD molded plastic
Terminals: Pure tin plated, lead free solderable per
MIL-STD-750. Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 10in-lbs. Max.
Weight: 0.2 ounce, 5.6 gram approximately
TO-3P/TO-247AD
.142(3.6)
.125(3.2)
.640(16.25)
.620(15.75)
Unit: inch (mm)
.199(5.05)
.175(4.45)
.126(3.2)
.110(2.8)
.050(1.25)
.045(1.15)
.225(5.7)
.204(5.2)
.225(5.7)
.204(5.2)
.095(2.4)
.030(0.75)
.017(0.45)
Positive
Common Cathode
Suffix "PT"
Negative
Common Anode
Suffix "PTA"
Doubler
Series Connection
Suffix "PTD"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
SYMBOL
VRRM
SF3004PT
SF3004PTA
SF3004PTD
200
Maximum RMS Voltage
VRMS
140
Maximum DC Blocking Voltage
VDC
200
Maximum Average Forward Rectified
Current TC=125^oC
IF(AV)
SF3006PT
SF3006PTA
SF3006PTD
400
280
400
30.0
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
300
(JEDEC method)
Maximum Instantaneous Forward Voltage
VF
0.98
1.3
@ 15.0 A
Maximum DC Reverse Current @TJ=25^oC
At Rated DC Blocking Voltage @TJ=125^oC
IR
10
500
Maximum Reverse Recovery Time (Note 1) Trr
35
Typical junction Capacitance (Note 2)
CJ
150
Operating Junction and Storage
Temperature Range
TJ, TSTG
-55 to +150
SF3008PT
SF3008PTA ^UNIT
SF3008PTD
600
V
420
V
600
V
A
A
1.7
V
uA
uA
nS
pF
o_C
NOTES : (1) Reverse recovery test conditions IF = 0.5A IR = 1.0A Irr = 0.25A.
(2) Thermal Resistance junction to terminal.
(3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
Rev.05
Page 1/2
© 2006 Thinki Semiconductor Co.,Ltd.
http://www.thinkisemi.com/