SF10A02 Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 10.0 Ampere Super Fast Rectifiers for Power Chargers

SF10A02 thru SF10A06
®
SF10A02 thru SF10A06
Pb
Pb Free Plating Product
10.0 Ampere Super Fast Rectifiers for Power Chargers
Features
¬ Special for E-Bike charger application
¬ Low forward voltage drop
¬ High current capability
¬ Low reverse leakage current
¬ High surge current capability
TO-220AC
.419(10.66)
.387(9.85)
.139(3.55)
MIN
Unit : inch (mm)
.196(5.00)
.163(4.16)
.054(1.39)
.045(1.15)
Mechanical Data
¬ Case:TO-220AC/TO-220C-2P Heatsink
¬ Epoxy: UL 94V-0 rate flame retardant
¬ Terminals: Solderable per MIL-STD-202
method 208
¬ Polarity: As marked on diode body
¬ Mounting position: Any
¬ Weight: 2.03 gram approximately
.038(0.96)
.019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL _SF10A02
Maximum Recurrent Peak Reverse Voltage VRRM
200
Maximum RMS Voltage
VRMS
140
Maximum DC Blocking Voltage
VDC
200
Maximum Average Forward Rectified
Current TC=100^oC
IF(AV)
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
(JEDEC method)
Maximum Instantaneous Forward Voltage
VF
0.95
@ 10.0 A
Maximum DC Reverse Current @TJ=25^oC
At Rated DC Blocking Voltage @TJ=125^oC
Maximum Reverse Recovery Time (Note 1)
Typical junction Capacitance (Note 2)
Typical Thermal Resistance (Note 3)
Operating Junction and Storage
Temperature Range
IR
Trr
CJ
R JC
TJ, TSTG
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
SF10A04
400
280
400
10.0
SF10A06 ^UNIT
600
V
420
V
600
V
A
100
A
1.3
10.0
250
35
65
2.2
-55 to +150
1.5
V
uA
uA
nS
pF
o_CW
o_C
Rev.02
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/