English
Language : 

SF104C Datasheet, PDF (1/2 Pages) Rectron Semiconductor – GLASS PASSIVATED SUPER FAST RECTIFIER
SF104C thru SF108C
®
SF104C thru SF108C
Pb
Pb Free Plating Product
10.0 Ampere Dual Common Cathode Super Fast Recovery Rectifier
Features
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Inverters/Solar Inverters
Plating Power Supply,SMPS and UPS
Car Audio Amplifiers and Sound Device Systems
Mechanical Data
Case: Heatsink TO-220AB
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.2 gram approximately
TO-220AB
.419(10.66)
.387(9.85)
.139(3.55)
MIN
Unit : inch (mm)
.196(5.00)
.163(4.16)
.054(1.39)
.045(1.15)
.038(0.96)
.019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
Case
Case
Case
Positive
Common Cathode
Suffix "C"
Negative
Doubler
Common Anode Tandem Polarity
Suffix "A"
Suffix "D"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL SF104C SF106C SF108C UNIT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current TC=100oC
VRRM
VRMS
VDC
IF(AV)
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
(JEDEC method)
Maximum Instantaneous Forward Voltage
@ 5.0 A
Maximum DC Reverse Current @TJ=25oC
At Rated DC Blocking Voltage @TJ=125oC
Maximum Reverse Recovery Time (Note 1)
Typical junction Capacitance (Note 2)
Typical Thermal Resistance (Note 3)
Operating Junction and Storage
Temperature Range
VF
IR
Trr
CJ
R JC
TJ, TSTG
200
140
200
0.98
400
280
400
10.0
100
1.3
10.0
250
35
65
2.2
-55 to +150
600
V
420
V
600
V
A
A
1.7
V
uA
uA
nS
pF
oCW
oC
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
Rev.04/2014
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/