MURF1020CTR-CT Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 10.0 Ampere Insulated Common Anode Ultra Fast Recovery Rectifier

MURF1020CTR thru MURF1060CTR
®
MURF1020CTR thru MURF1060CTR
Pb
Pb Free Plating Product
10.0 Ampere Insulated Common Anode Ultra Fast Recovery Rectifier
Features
¬ Fast switching for high efficiency
¬ Low forward voltage drop
¬ High current capability
¬ Low reverse leakage current
¬ High surge current capability
ITO-220AB
.406(10.3)
.381(9.7)
.134(3.4)
.118(3.0)
Unit : inch (mm)
.189(4.8)
.165(4.2)
.130(3.3)
.114(2.9)
Mechanical Data
¬ Case:ITO-220AB Isolated/Insulated
¬ Epoxy: UL 94V-0 rate flame retardant
¬ Terminals: Solderable per MIL-STD-202
method 208
¬ Polarity:As marked on diode body
¬ Mounting position: Any
¬ Weight: 2.2 gram approximately
.071(1.8)
.055(1.4)
.055(1.4)
.039(1.0)
.035(0.9)
.011(0.3)
.1
(2.55)
.1
(2.55)
.114(2.9)
.098(2.5)
.032(.8)
MAX
Case
Case
Case
Positive
Negative
Common Cathode Common Anode
Doubler
Suffix "CT"
Suffix "CTR" ^{Suffix "CTD"}
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
SYMBOL
VRRM
MURF1020CT
MURF1020CTR
MURF1020CTD
200
Maximum RMS Voltage
VRMS
140
Maximum DC Blocking Voltage
VDC
200
Maximum Average Forward Rectified
Current TC=100^oC
IF(AV)
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
(JEDEC method)
Maximum Instantaneous Forward Voltage
VF
0.98
@ 5.0 A
Maximum DC Reverse Current @TJ=25^oC
At Rated DC Blocking Voltage @TJ=125^oC
IR
Maximum Reverse Recovery Time (Note 1) Trr
Typical junction Capacitance (Note 2)
CJ
Typical Thermal Resistance (Note 3)
R JC
Operating Junction and Storage
Temperature Range
TJ, TSTG
MURF1040CT
MURF1040CTR
MURF1040CTD
400
280
400
MURF1060CT
MURF1060CTR ^UNIT
MURF1060CTD
600
V
420
V
600
V
10.0
A
100
A
1.3
10.0
250
35
65
2.2
-55 to +150
1.7
V
uA
uA
nS
pF
o_CW
o_C
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/