GP1601A Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 16.0 Ampere Dual Common Anode General Purpose Rectifier Diodes

GP1601A thru GP1607A
®
GP1601A thru GP1607A
Pb
Pb Free Plating Product
16.0 Ampere Dual Common Anode General Purpose Rectifier Diodes
Features
Glass passivated chip junction
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Inverters/Solar Inverters
Plating Power Supply,SMPS and UPS
Car Audio Amplifiers and Sound Device Systems
Mechanical Data
Case: Heatsink TO-220AB
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.1 gram approxiamtely
TO-220AB
.419(10.66)
.387(9.85)
.139(3.55)
MIN
Unit : inch (mm)
.196(5.00)
.163(4.16)
.054(1.39)
.045(1.15)
.038(0.96)
.019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
Case
Positive
Common Cathode
Case
Negative
Common Anode
Suffix "A"
Case
Doubler
Tandem Polarity
Suffix "D"
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{GP GP GP GP GP GP GP} Units
1601A1602A1603A 1604A1605A1606A1607A
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
I_(AV)
16.0
A
@T_C = 100 ^oC
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
150
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@8.0A
V_F
1.1
V
Maximum DC Reverse Current @ T_C=25 ^oC
at Rated DC Blocking Voltage @ T_C=125 ^oC
I_R
Typical Junction Capacitance ( Note 1)
Cj
10
uA
250
uA
50
pF
Typical Thermal Resistance (Note 2)
R_θJC
Operating and Storage Temperature Range T_J ,T_STG
1.5
- 65 to + 150
o_C/W
o_C
Notes: _{1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.}
2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate.
Rev.04/2014
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/