GBU6005 Datasheet, PDF (1/2 Pages) Diodes Incorporated – 6.0A GLASS PASSIVATED BRIDGE RECTIFIER

GBU6005 thru GBU610
®
GBU6005 thru GBU610
Pb
Pb Free Plating Product
6.0 AMPERE GLASS PASSIVATED FLAT BRIDGE RECTIFIERS
Features
GBU
Unit: inch (mm)
• Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
• Ideal for printed circuit boards
• Glass passivated chip junction
• Reliable low cost construction utilizing molded
plastic technique
Mechanical Data
• Case: Molded plastic GBU
• Terminals: leads solderable per MIL-STD-202
Method 208 guaranteed
• Mounting Position: Any
.880(22.3)
.860(21.8)
.160(4.1)
.140(3.5)
.100(2.54)
.085(2.16)
.080(2.03)
.065(1.65)
.190(4.83)
.210(5.33)
.050(1.27)
.040(1.02)
.140(3.56)
.130(3.30)
.040(1.02)
.030(0.76)
.030(0.75)
.017(0.45)
Absolute Maximum Ratings and Characteristics
Rating at 25℃ ambient temperature unless otherwise specified. Single-phase, half wave, 60Hz, resistive or inductive
load. For capacitive load, derate current by 20%.
GBU GBU GBU GBU GBU GBU GBU
Symbols
Units
6005 601 602 604 606 608 610
Maximum recurrent peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
Maximum DC blocking voltage
Maximum average forward rectified current
at T_C = 100℃ (Note 1)， (Note 2)
VDC
I_F(AV)
50 100 200 400 600 800 1000 V
6
A
Peak forward surge current，8.3ms single half-sine-wave
superimposed on rated load (JEDEC Method)
I_FSM
175
A
Maximum forward voltage
at 3.0A DC and 25℃
VF
1
V
Maximum reverse current at TA = 25℃
at rated DC blocking voltage TA = 125℃
I_R
5
µA
500
Typical junction capacitance (Note 3)
Typical thermal resistance (Note 1),(Note 2)
Typical thermal resistance (Note 1),(Note 2)
Operating and storage temperature range
CJ
R_θJA
R_θJC
TJ ,TS
211
94
7.4
2.2
-55 to +150
pF
℃/W
℃/W
℃
Notes: (1). Units case mounted on 2.6x1.4x0.06” thick (6.5x3.5x0.15 cm) AI. plate heatsink..
(2). Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum
heat transfer with #6 screws.
(3). Measured at 1MHz and applied reverse voltage of 4.0 VDC.
Rev.05
© 2006 Thinki Semiconductor Co., Ltd.
Page 1/2
http://www.thinkisemi.com/