GB351P Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 35.0 Ampere Heatsink Block Automotive Rectifier Diodes

GB351P thru GB356P
®
GB351P thru GB356P
Pb
Pb Free Plating Product
35.0 Ampere Heatsink Block Automotive Rectifier Diodes
Features:
Low leakage
Low forward voltage drop
High current capability
High forward surge current capability
Mechanical Data:
Technology: Glass Passivation Pellet/Clip Bonding
Case: Sintered temperature < 260^oC
Polarity: As marked on body. (Note2)
Lead: Plated lead, solderable per MIL-STD-202E method 208C
Mounting: BLOCK/TO-230 package type
Application:
Block Diode/Alternator Diode
Stack Silicon Diffused Diode alternative
Special for Car AC Alternator rectifier application
TO-230/BLOCK
Case
Lead
Positive
Suffix:"P"
Unit:mm
Case
Lead
Negative
Suffix:"N"
Maximum Ratings and Electrical Characteristics
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
Parameters
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum Average rectified forward current at T_C=105^oC
Peak forward surge current 8.3mS single half sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t<8.3mS)
Maximum instantaneous forward voltage drop at 100A
Maximum DC reverse current
at rated DC blocking voltage
Typical thermal resistance
T =25oC
A
T_A=100^oC
Operating and storage temperature range
Symbols _{GB351P GB352P GB353P GB354P GB356P} Units
V_RRM
V_RMS
V_DC
I_(AV)
I_FSM
I²t
100
70
100
200
300
400
140
210
280
200
300
400
35
500
1038
600
Volts
420
Volts
600
Volts
Amps
Amps
A²S
V_F
I_R
R_θJL
T_J, T_STG
1.10
5.0
450
0.8
-65 to +175
Volts
uA
o_C/W
o_C
Notes: 1. Enough heatsink must be considered in application.
2. Suffix "N" is for lead Negative.Suffix "P" is for lead Positive.
Rev.04/2014
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/