English
Language : 

FMG32S Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 20.0 Ampere SwitchMode Common Cathode Super Fast Rectifiers
FMG32S thru FMG36S
®
FMG32S thru FMG36S
Pb
Pb Free Plating Product
20.0 Ampere SwitchMode Common Cathode Super Fast Rectifiers
Features
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Inverters/Solar Inverters
Plating Power Supply,SMPS and UPS
Car Audio Amplifiers and Sound Device Systems
Mechanical Data
Case: TO-247AD/TO-3P
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 5.6 gram approximately
TO-3P/TO-247AD
.142(3.6)
.125(3.2)
.640(16.25)
.620(15.75)
Unit : inch (mm)
.199(5.05)
.175(4.45)
.126(3.2)
.110(2.8)
.050(1.25)
.045(1.15)
.225(5.7)
.204(5.2)
.225(5.7)
.204(5.2)
.095(2.4)
.030(0.75)
.017(0.45)
Case
Case
Case
Positive
Common Cathode
Suffix "S"
Negative
Doubler
Common Anode Tandem Polarity
Suffix "R"
Suffix "U"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL FMG32S
Maximum Recurrent Peak Reverse Voltage VRRM
200
Maximum RMS Voltage
VRMS
140
Maximum DC Blocking Voltage
VDC
200
FMG33S
FMG34S
FMG36S
UNIT
400
600
V
280
420
V
400
600
V
Maximum Average Forward Rectified
Current TC=125oC
IF(AV)
20.0
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
200
(JEDEC method)
175
A
Maximum Instantaneous Forward Voltage
VF
0.98
@ 10.0 A
Maximum DC Reverse Current @TJ=25oC
At Rated DC Blocking Voltage @TJ=125oC
IR
Maximum Reverse Recovery Time (Note 1)
Trr
Typical junction Capacitance (Note 2)
CJ
120
Operating Junction and Storage
Temperature Range
TJ, TSTG
1.3
1.7
V
10.0
uA
250
uA
35
nS
70
pF
-55 to +150
oC
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
Rev.04
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/