F20C20CT Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 20.0 Ampere Dual Common Cathode Fast Recovery Rectifier Diode

F20C20CT thru F20C60CT
®
F20C20CT thru F20C60CT
Pb
Pb Free Plating Product
20.0 Ampere Dual Common Cathode Fast Recovery Rectifier Diode
Features
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Inverters/Solar Inverters
Plating Power Supply,SMPS and UPS
Car Audio Amplifiers and Sound Device Systems
Mechanical Data
Case: Heatsink TO-220AB
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202 method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.2 gram approximately
TO-220AB
.419(10.66)
.387(9.85)
.139(3.55)
MIN
Unit : inch (mm)
.196(5.00)
.163(4.16)
.054(1.39)
.045(1.15)
.038(0.96)
.019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
Case
Case
Case
Case
Positive
Negative
* * ^Doubler
Reverse Doubler
Common Cathode Common Anode Tandem Polarity Tandem Polarity
* ^{Prefix "F20C" Prefix "F20A" Available for Mass Production}
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
SYMBOL ^{F20C20CT F20C40CT F20C60CT} UNIT
F20A20CT F20A40CT F20A60CT
VRRM
200
400
600
V
VRMS
140
280
420
V
Maximum DC Blocking Voltage
VDC
200
400
600
V
Maximum Average Forward Rectified
Current TC=125^oC
IF(AV)
20.0
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
200
(JEDEC method)
175
A
Maximum Instantaneous Forward Voltage
VF
0.98
@ 10.0 A
Maximum DC Reverse Current @TJ=25^oC
At Rated DC Blocking Voltage @TJ=125^oC
IR
Maximum Reverse Recovery Time (Note 1)
Trr
Typical junction Capacitance (Note 2)
CJ
120
Operating Junction and Storage
Temperature Range
TJ, TSTG
1.3
1.7
V
10.0
uA
250
uA
35
nS
70
pF
-55 to +150
o_C
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
Rev.05
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/