F16C20A Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 16.0 Ampere Heatsink Common Anode Fast Recovery Rectifier Diode

F16C20A thru F16C60A
®
F16C20A thru F16C60A
Pb
Pb Free Plating Product
16.0 Ampere Heatsink Common Anode Fast Recovery Rectifier Diode
Feature
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Environment(Inverters/Converters)
Plating Power Supply,Adaptor,SMPS and UPS
Car Audio Amplifiers and Sound Device System
Mechanical Data
Case:TO-220AB Heatsink
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.2 gram approximately
TO-220AB
.419(10.66)
.387(9.85)
.139(3.55)
MIN
Unit : inch (mm)
.196(5.00)
.163(4.16)
.054(1.39)
.045(1.15)
.038(0.96)
.019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
Case
Positive
Common Cathode
Suffix "C"
Case
Negative
Common Anode
Suffix "A"
Case
Doubler
Tandem Polarity
Suffix "D"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current TC=100^oC
VRRM
VRMS
VDC
IF(AV)
F16C20C
F16C20A
F16C20D
200
140
200
F16C40C
F16C40A
F16C40D
400
280
400
16.0
F16C60C
F16C60A ^UNIT
F16C60D
600
V
420
V
600
V
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
175
(JEDEC method)
150
A
Maximum Instantaneous Forward Voltage
VF
0.98
1.3
@ 8.0 A
Maximum DC Reverse Current @TJ=25^oC
At Rated DC Blocking Voltage @TJ=125^oC
IR
10.0
250
Maximum Reverse Recovery Time (Note 1) Trr
35
Typical junction Capacitance (Note 2)
CJ
90
Typical Thermal Resistance (Note 3)
R JC
2.2
Operating Junction and Storage
Temperature Range
TJ, TSTG
-55 to + 150
NOTES : (1) Reverse recovery test conditions IF= 0.5A, IR= 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
1.7
V
uA
uA
nS
pF
o_C/W
o_C
Rev.04/2014
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/