F12C20CT Datasheet, PDF (1/2 Pages) Thinki Semiconductor Co., Ltd. – 12.0 Ampere Common Cathode Fast Recovery Rectifier Diode

F12C20CT thru F12C60CT
®
F12C20CT thru F12C60CT
Pb
Pb Free Plating Product
12.0 Ampere Common Cathode Fast Recovery Rectifier Diode
Feature
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Environment(Inverters/Converters)
Plating Power Supply,Adaptor,SMPS and UPS
Car Audio Amplifiers and Sound Device System
Mechanical Data
Case:TO-220AB Heatsink
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.2 gram approximately
TO-220AB
.419(10.66)
.387(9.85)
.139(3.55)
MIN
Unit : inch (mm)
.196(5.00)
.163(4.16)
.054(1.39)
.045(1.15)
.038(0.96)
.019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
Case
Case
Case
Case
Positive
Negative
* * ^Doubler
Reverse Doubler
Common Cathode Common Anode Tandem Polarity Tandem Polarity
* ^{Prefix "F12C" Prefix "F12A" Available for Mass Production}
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
SYMBOL ^{F12C20CT F12C40CT}
F12A20CT F12A40CT
VRRM
200
400
VRMS
140
280
F12C60CT _UNIT
F12A60CT
600
V
420
V
Maximum DC Blocking Voltage
VDC
200
400
600
V
Maximum Average Forward Rectified
Current TC=100^oC
IF(AV)
12.0
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
(JEDEC method)
100
A
Maximum Instantaneous Forward Voltage
VF
0.98
@ 6.0 A
Maximum DC Reverse Current @TJ=25^oC
At Rated DC Blocking Voltage @TJ=125^oC
IR
Maximum Reverse Recovery Time (Note 1) Trr
Typical junction Capacitance (Note 2)
CJ
Typical Thermal Resistance (Note 3)
R JC
Operating Junction and Storage
Temperature Range
TJ, TSTG
1.3
10.0
250
35
65
2.2
-55 to +150
1.7
V
uA
uA
nS
pF
o_C/W
o_C
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
Rev.05
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/