TSM1C103F34D3R Datasheet, PDF (6/8 Pages) Thinking Electronic Industrial Co.,Ltd – SMD NTC Thermistor for Temperature Sensing

NTC Thermistor for Automotive: TSM-C Series
SMD NTC Thermistor for Temperature Sensing
Item
Operational Life
Standard
Test conditions / Methods
Test temp.: 150 +3/-0°C
MIL-STD-202 Duration: 1000 h
Method 108 Test Power：1mW
Measurement at 24±2 hours after test conclusion.
Specifications
No visible damage
∣△R₂₅/R₂₅∣≦ 5 %
External Visual
MIL-STD-883
Inspect device construction, marking and workmanship.
Method 2009
No visible damage
Physical
Dimension
JESD22
Method
JB-100
Verify physical dimensions to the applicable device
specification.
Resistance to
Solvents
Per MIL-STD-202 Method 215
MIL-STD-202
Solvent 1: 1 part (by volume) of isopropyl alcohol 3 part
Method 215
(by volume) of mineral spirits.
Test Condition F
Peak value：1500g's
Mechanical Shock
MIL-STD Half sine Waveform
-202-213 Normal duration (D)： 0.5ms
In 3 directions perpendicularly intersecting each other
(total 18 times).
Acceleration：5 g's
Vibration
MIL-STD-202 Sweep time: 20 min
Method 204 Frequency range: 10 to 2000 Hz
3×12 cycles
Within the specified
values
No visible damage
No visible damage
∣△R₂₅/R₂₅∣≦ 5 %
No visible damage
∣△R₂₅/R₂₅∣≦ 5 %
Resistance to
Soldering Heat
Condition B No pre-heat of samples.
MIL-STD-202 Temperature：260±5°C,Time ：10±1s
Method 210 Immersion and emersion rate：25mm/s ±6 mm/s
Number of heat cycles：1
No visible damage
∣△R₂₅/R₂₅∣≦ 5 %
Thermal Shock
Lower test temp.：-55 +0/-3°C
Upper test temp.：150 +3/-0°C
MIL-STD-202
Maximum transfer time：20 seconds.
Method 107
Dwell time：15 minutes. Air-Air.
Number of cycles：300
No visible damage
∣△R₂₅/R₂₅∣≦ 5 %
THINKING ELECTRONIC INDUSTRIAL CO., LTD.
6
All specifications are subject to change without notice.
www.thinking.com.tw 2011.06