PLA03101MP5D2 Datasheet, PDF (5/8 Pages) Thinking Electronic Industrial Co.,Ltd – For Switching Application

CPTC Thermistor：PL Series
For Switching Application
„ Reliability Test
Item
Standard
Tensile Strength
Of Terminals
IEC60068-2-21
Solderability
IEC60068-2-20
Resistance to
Soldering Heat
IEC60068-2-20
Vibration
IEC60068-2-6
Test conditions / Methods
Fasten body and apply a force gradually
to each lead for 10±1 sec.
Terminal diameter
Force
(mm)
T(N)
0.35<d≦0.5
5.0
0.5<d≦0.8
10.0
Then dip each lead into 255±5℃ solder
for 3±0.5sec.to the 4±1mm above from body .
Dip each lead into 350±10℃ solder for 3～4sec.
to the 4±1mm above body.
Fasten body to baseboard with solder perfectly
and supply since wave oscillation at frequency from
10 HZ to 55HZ all oscillation with 0.75 mm of
Vibrato for 24 cycles in each of 3 naturally
perpendicular plane for a total of 6 hours
Specifications
∣△R/R25∣≦20%
No damage observed
At least 95% of terminal
electrode is covered by new
solder
∣△R/R25∣≦20%
No damage observed
∣△R/R25∣≦20%
No damage observed
Shock
IEC60068-2-27
Putting the PTC product in the shock equipment
Shock wave: half-sine
⊿V=1.0m/s;Acceleration:50m/s2 ;Pulse time:30ms
∣△R/R25∣≦20%
No damage observed
Temp. cycle
Climatic sequence
IEC60068-2-14
IEC60738-1
-40±3℃×30min.→+85±2℃×30min ×5Cycles
excessive time:2min＜T＜3min
+40 ℃,20%R.H X 24hrs →100 ℃ X 16hrs→25℃ X 2hrs→
+40 ℃,95%R.HX 24hrs→ 0 ℃ X 2hrs→+40 ℃,95%R.HX 24hrs→
25 ℃ X (1~2)hrs
∣△R/R25∣≦20%
No damage observed
∣△R/R25∣≦20%
No damage observed
Endurance at upper
category temperature
IEC60068-2-2
UCT=60℃, for 1000hrs
∣△R/R25∣≦20%
No damage observed
The highest
temperature and
max voltage load
IEC60738-1
Humidity
IEC60068-2-3
UCT=60℃, 270V_AC, I≦Imax
for 1000hrs
40±5℃,90~95%RH,For 1000±2hrs
∣△R/R25∣≦20%
No damage observed
∣△R/R25∣≦20%
No damage observed
Room Temperature
Intermittent Load
IEC60738-1
25±5℃, 270V_AC, I≦Imax
1min. on and 5min. Off ×､10,000 cycles
∣△R/R25∣≦20%
No damage observed
THINKING ELECTRONIC INDUSTRIAL Co., LTD.
5
www.thinking.com.tw 2006.07