English
Language : 

THCV213 Datasheet, PDF (1/1 Pages) THine Electronics, Inc. – LVDS SerDes transmitter and receiver
THCV213 and THCV214 Rev.0.30
Preliminary
THCV213 and THCV214
LVDS SerDes transmitter and receiver
THine
General Description
THCV213 and THCV214 is designed to support a pixel
data transmission between the Host and Display. The
chipset can transmit 18bit data and 4bit control data
through only a single differential cable at pixel clock
frequency from 5MHz to 40MHz.
By V-by-OneTM technologies, unique encoding scheme
and proprietary CDR technique, a link synchlonization
is achieved without any frequency reference such as
crystal oscillator. It drastically improves the cost and
size of the display system.
THCV213 transmitter converts the data into a single
LVDS serial data stream with embedded clock. It sup-
ports pre-emphasis mode for long cable transmission.
THCV214 receiver extracts the clock from the embed-
ded clock and transforms the serial data stream back
into the parallel data.
To confirm the reliability of link, several functions are
supported. THCV213 can transmit a INIT pattern to
establish a link if INIT sequence is required. THCV214
indicates the LOCK status.
Features
• Transmit 18bit data and 4bit control data through a
single differential cable
• Wide frequency range: 5MHz to 40MHz
• Support INIT pattern and LOCK indicator
• Pre Emphasis Mode
• Clock Edge Selectable
• Dual Display Mode
• Power Down Mode
• Low power single 3.3V CMOS design
• 48pin TQFP/QFN
Block Diagram
D[17:0]
DE
SYNC[2:0]
INIT
PRBS
THCV213
TXOUT1+ RXIN+
TXOUT1- RXIN-
TXOUT2+
TXOUT2-
THCV214
D[17:0]
DE
SYNC[2:0]
OE
PLL
CLKIN
EDGE
PRE[1:0]
DUAL
PDWN
PLL & CDR
CLKOUT
EDGE
MOD[1:0]
LOCKN
PDWN
1
Copyright 2004, THine Electronics Inc., All rights reserved