ZTT12.0MT Datasheet, PDF (5/5 Pages) Tiger Electronic Co.,Ltd – CERAMIC RESONATOR

(Continued from the preceding page)
No
Item
6.9
6.9.1
6.9.2
Terminal
Strength
Terminal
Pulling
Terminal
Bending
Condition of Test
Force of 5N is applied to each lead in
axial direction for 10±1 sec.
When force of 5N is applied to each
lead in axial direction,the lead shall
folded up 90°from the axial direction
and folded back to the axial direction.
The speed of folding shall be each 3
seconds.
Performance
Requirements
No visible damage
and it shall fulfill the
specifications in
Table 1.
Table 1
Item
Specification after test
Oscillation Frequency Change
Δfosc/fosc （%）max
±0.3（Refer to the initial value）
Resonant Impedance Ro（Ω）max
30
Note ： The limits in the above table are referenced to the initial
measurements.
7. REVIEW OF SPECIFICATIONS
When something gets doubtful with this specifications, we shall jointly
work to get an agreement.