SFH618A_15 Datasheet, PDF (1/8 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, Low Input Current

www.vishay.com
SFH618A, SFH6186
Vishay Semiconductors
Optocoupler, Phototransistor Output, Low Input Current
A1
C2
1
4C
3E
i179061-1
1
DESCRIPTION
The SFH618A (DIP) and SFH6186 (SMD) feature a high
current transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infrared
diode emitter, which is optically coupled to silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.The couplers are
end-stackable with 2.54 mm lead spacing. Creepage and
clearance distances of > 8 mm achieved with option 6.
FEATURES
• Good CTR linearity depending on forward current
• Low CTR degradation
• High collector emitter voltage, V_CEO = 55 V
• Isolation test voltage, 5300 V_RMS
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode transient immunity
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Telecom
• Industrial controls
• Battery powered equipment
• Office machines
AGENCY APPROVALS
The safety application model number covering all products
in this datasheet is SFH618A. This model number should be
used when consulting safety agency documents.
• UL1577, file no. E52744 system code H or J, double
protection
• CSA 93751
• DIN EN 60747-5-5 (VDE 0884-5) available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO
ORDERING INFORMATION
DIP-#
Option 6
S
F
H
6
1
8
#
-
#
X
0
#
#
T
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
7.62 mm
Option 7
10.16 mm
Option 9
AGENCY
CERTIFIED/PACKAGE
CTR (%)
1 mA
UL, CUL
63 to 125
100 to 200
DIP-4
SFH618A-2
SFH618A-3
DIP-4, 400 mil, option 6
-
SFH618A-3X006
SMD-4, option 7
-
-
SMD-4, option 9
SFH6186-2T ⁽¹⁾
SFH6186-3T ⁽¹⁾, SFH6186-3T1 ⁽²⁾,
SFH6186-3X002T ⁽¹⁾
VDE, UL, CUL
63 to 125
100 to 200
DIP-4
-
SFH618A-3X001
DIP-4, 400 mil, option 6
-
SFH618A-3X016
SMD-4, option 7
-
SFH618A-3X017T ⁽¹⁾
SMD-4, option 9
-
SFH6186-3X001T ⁽¹⁾
Notes
• Additional options may be possible, please contact sales office
(1) _{Also available in tubes, do not put T to the end}
(2) _{Product is rotated 90° in tape and reel cavity}
> 0.7 mm
> 0.1 mm
160 to 320
SFH618A-4
-
-
SFH6186-4T ⁽¹⁾
160 to 320
SFH618A-4X001
SFH618A-4X016
-
SFH6186-4X001T
250 to 500
SFH618A-5
-
SFH618A-5X007T ⁽¹⁾
SFH6186-5T ⁽¹⁾,
SFH6186-5T1 ⁽²⁾
250 to 500
-
SFH618A-5X016
SFH618A-5X017T ⁽¹⁾
SFH6186-5X001T ⁽¹⁾
Rev. 2.6, 31-Aug-15
1
Document Number: 83673
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000