5002R Datasheet, PDF (15/30 Pages) Teridian Semiconductor Corporation – Dual SCART A/V Switch

AVPro® 5002R
Dual SCART A/V Switch
DATA SHEET
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
Operation beyond the maximum ratings may damage the device
PARAMETER
Storage temperature
Junction operating temperature
5V supply voltage pins
12V supply pin
Voltage applied to Digital and Video Inputs
Voltage applied to video pins
Voltage applied to audio pins
Voltage applied to FNC pin (input)
ESD tolerance – SCART pins*
ESD tolerance – other pins
RATING
-55 to 150 °C
+125 °C
-0.3 V < VCC < 6 V
-0.3 V < VDD < 13 V
-0.3 V to VCC+0.3 V
-0.3 V to VCC+0.3 V
-0.3 V < VDD < 13 V
-0.3 V < VDD < 13 V
±5 kV
±2.5 kV
* Note: To pass the SCART 15 kV ESD requirement, external protection for the IC is required.
SPECIFICATIONS: Unless otherwise specified: 0^° < Ta < 70 ^°C; power supplies VCC = +5.0 V ±5%, VDD = 12.0 V
±5%.
PARAMETER
CONDITION
MIN
Operating Characteristics
Power Supply Currents
No signal, video outputs not loaded
(Default register setting)
VCC (+5 VDC)
VDD (+12 VDC)
Power Supply Currents
No signal, video outputs not loaded
(Composite Auxiliary outputs on) VCC (+5 VDC)
VDD (+12 VDC)
PSRR
Switch time
f_in = 100 Hz, 0.3 Vpp on VCC/ VDD
40
From rising edge of 8^th clock
Serial Port Timing( Set by I²C controller )
SCLK Input Frequency
SCLK LOW time (tCL)
1.3
SCLK HIGH time (tCH)
0.6
Rise time (tRT)
SCLK and SDATA
Fall time (tFT)
SCLK and SDATA
Data set-up time* (tDSU)
SDATA change to SCLK HIGH
100
Data hold time* (tDH)
SCLK LOW to SDATA change
30
Start set-up time (tSSU)
0.6
Start hold time (tSH)
0.6
Stop set-up time (tPSU)
0.6
Glitch rejection
maximum pulse on SCLK and/or
SDATA
* These specifications also apply to an acknowledge generated by the device.
NOM
18
17
28
20
0.8
MAX
400
300
300
50
UNIT
mA
mA
mA
mA
dB
μs
kHz
μs
μs
ns
ns
ns
ns
μs
μs
μs
ns
Page: 15 of 30
© 2008 TERIDIAN Semiconductor Corporation
Rev 2.1