71M6403 Datasheet, PDF (1/75 Pages) Teridian Semiconductor Corporation – Electronic Trip Unit

71M6403
Electronic Trip Unit
SEPTEMBER 2006
GENERAL DESCRIPTION
The Teridian 71M6403 is an electronic trip unit (ETU) system-on-chip
device for air circuit breakers (ACB), molded case circuit breakers
(MCCB) and other types of intelligent switchgear. Utilizing Teridian’s
patented Single Converter Technology, the 71M6403 incorporates a
22-bit delta-sigma ADC, 7 current sensor inputs, digital temperature
compensation, precision voltage reference, 32-bit programmable
computation engine, timers, Real Time Clock (RTC), two UARTs and a
single cycle execution 8-bit MCU.
Armed with an internal digital di/dt integrator, this programmable device
supports either current transformer (CT) or Rogowski-Coils for any or all
input channels and provides instantaneous and delayed over current,
earth-leakage, ground-fault and arc fault protection functions.
Furthermore, the device may be configured to support any number of
conventional or custom protection algorithms that fit specific load
configurations in the field.
The 71M6403 also includes a 5V LCD charge pump as well as 3V LCD
support with up to 168 pixels display and up to 22 DIO pins. Easy
conversion to ROM offers unprecedented cost structure for high volume
MCCB applications.
A complete suite of in-circuit emulator (ICE) and development tools, a
powerful real-time signal monitoring tool, programming libraries and
reference designs enable rapid development of advanced switchgear.
Current
Sensors
DC in
CONVERTER
I0
I1
I2
I3
I4
I5
INEUTRAL
VOLTAGE REF
VREF
VBIAS
SERIAL PORTS
TX
RX
OPTO
SENSE
RX
DRIVE ^TX
COMPARATOR
Power
Fault
Detection
V1
V2
INEUTRAL
V3.3A V3.3D GNDA GNDD
Teridian
71M6403
LCD 5V
BOOST
REGULATOR
V2.5
TEMP
SENSOR
RAM
COMPUTE
ENGINE
LCD DRIVER
DIO, PULSE
COM0..3
SEG0..23
SEG 24..27
DIO 4..11
FLASH/
ROM
SEG 32..41
DIO 12..21
MPU
TIMERS
ICE
DIO 4,5
CLOCK
CK38
CK
3/5V LCD
88.88.8888
Accumulator Indicator
Trip Indicator
External EEPROM
4040 Counter
19.6608MHz
FEATURES
22-bit Sigma-delta converter
Six main sensor inputs
One auxiliary input
Supports CT or Rogowski Coils
Internal di/dt integrators
< 5 msec. startup time
Better than 10ppm/°C accuracy
Instantaneous and delay trip
Peak & RMS current measurement
Calculated or measured GND
current
Power measurement functions
option
Internal temperature sensor
Digital temperature compensation
Independent 32-bit compute engine
Two UART ports
Two timers
Hardware watchdog
Internal power fault detector
Real Time Clock (RTC)
Battery backup (RTC, RAM)
8-bit MPU (80515) - 1 clock cycle
per instruction (5 Mhz max.)
LCD driver ( ≤168 pixels)
5V LCD charge pump
Up to 22 general purpose I/O pins
High speed serial interface (SSI)
I²C EEPROM interface
64KB Flash, 7KB RAM
Flash memory security
30mW @ 3.3V
100-lead LQFP package
Page: 1 of 75
© 2006 TERIDIAN Semiconductor Corporation
REV 1.0