50-00184 Datasheet, PDF (2/3 Pages) Tensility International Corp. – Connector, dc plug, 4.0x1.7xL20 mm, EIAJ-2 molding style, spring contacts

part number: 50-00184
description: Connector, dc plug, 4.0x1.7xL20 mm, EIAJ-2,
molding style, spring contacts
date: May 15, 2012
rev: A
page: 2 of 3
Materials:
insulator
center pin
outer sleeve
PBT + 15% GF (94-HB), black
P-bronze C5191
brass C2700
Electrical:
dielectric strength
insulation resistance
contact resistance
rated voltage
rated current
500 Vac, 1 minute
500 Vdc/100 MΩ
30 mΩ or less between plug and jack
18 Vdc
4A
Mechanical:
insertion force
extraction force
durability
0.5 ~ 2 kgf when mating with a standard jack
0.4 ~ 1.5 kgf when mating with a standard jack
meets specifications below after 5000 cycles: insertion force: 0.3~2 kgf; withdrawal force: 0.2~1.5 kgf;
contact resistance: 100 mΩ or less between plug and jack
Environmental test:
damp test
test conditions
requirements
40 °C, relative humidity 90-100%, 96 hours then cool to ambient, 2 hours at ambient conditions
dielectric strength: 500 Vac at 1 minute; insulation resistance: 500 Vdc / 50 MΩ min.; contact resis-
tance: 100 mΩ max.
dry test
test conditions
requirements
70 °C, relative humidity 70-85%, 96 hours then cool to ambient, 2 hours at ambient conditions
no deformation; insulation resistance: 500 Vdc / 50 MΩ min.; contact resistance: 100 mΩ max.
salt spray test
test conditions
requirements
5% NaCl salt mist, 35 ±2 °C, relative humidity 90-95%, 24 hours; parts washed after testing
electrical and mechanical specifications above are met; contact resistance: 80 mΩ max.
Operating range:
temperature
humidity
-25 °C to 70° C
85% or less