50-00124 Datasheet, PDF (2/3 Pages) Tensility International Corp. – Connector, 4C audio jack, 2.5x7.4xL22.6 mm, brass, nickel plated, molding style

part number: 50-00124
description: Connector, 4C audio jack, 2.5x7.4xL22.6
mm, brass, nickel plated, molding style
date: September 26, 2011
rev: A
page: 2 of 3
Materials:
insulator
contact 1st pole
contact 2nd pole
contact 3rd pole
contact 4th pole
jack head
outer sleeve
POM, black
C5191, nickel, 2 μm min.
C5191, nickel, 2 μm min.
C5191, nickel, 2 μm min.
C5191, nickel, 2 μm min.
brass, C3604, nickel, 2 μm min.
brass, C2700, nickel, 2 μm min.
Electrical:
dielectric strength
insulation resistance
contact resistance
200 Vac, 1 minute
100 Vdc/50 MΩ
100 mΩ or less between plug and jack
Mechanical:
insertion force
withdrawal force
durablility
1. insertion force
2. withdrawal force
3. contact resistance
0.4~4 kgf when mating with a standard jack
0.4~4 kgf when mating with a standard jack
mated with standard jack for 5000 times and meets requirements below
0.3 ~ 4 kgf
0.3 ~ 4 kgf
100 mΩ or less between plug and jack
Environmental test:
damp test
test conditions
requirements
40 °C, relative humidity 90-100%, 96 hours then cool to ambient, 2 hours at ambient conditions
dielectric strength: 200 Vac at 1 minute; insulation resistance: 100 Vdc / 50 MΩ min.
dry test
test conditions
requirements
70 °C, relative humidity 70-85%, 96 hours then cool to ambient, 2hours at ambient conditions
no deformation; contact resistance: 100 mΩ max
salt spray test
test conditions
requirements
Operating range:
temperature
humidity
5% NaCl salt mist, 35 ±2 °C, relative humidity 90-95%, 24 hours; parts washed after testing
electrical and mechanical specifications above are met; contact resistance: 100 mΩ max.
-25°C to + 70°C
85% or less