50-00066 Datasheet, PDF (2/3 Pages) Tensility International Corp. – Connector, dc plug, 3.5x1.1xL17.5 mm, spring contacts, 3 conductors

part number: 50-00066
description: Connector, dc plug, 3.5x1.1xL17.5 mm,
spring contacts, 3 conductors
date: December 3, 2012
rev: A1
page: 2 of 3
Materials:
insulator
center contact (DC in +)
ring (Data)
outer sleeve (DC in -)
Electrical:
dielectric strength
insulation resistance
contact resistance
rated voltage
rated current (DC in +)
rated current (DC in -)
rated current (Data)
nylon, PA66, black
P-bronze C5191
brass C3604
brass C3604
500 Vdc/1 minute
500 Vdc/100 M Ω
30 m Ω or less between plug and jack
24 Vdc
5A @ 30 °C max. ∆T over ambient
5A @ 30 °C max. ∆T over ambient
1A @ 30 °C max. ∆T over ambient
Mechanical:
insertion force
withdrawal force
durability
0.5 ~ 2 kgf when mating with a standard jack
0.3 ~ 1.5 kgf when mating with a standard jack
mated with a standard jack for 5000 cycles and meets the following: insertion force: 0.4 ~ 2
kgf; withdrawal force: 0.2 ~ 1.5 kgf; contact resistance: 100 m Ω or less between plug and jack
Environmental requirements:
damp test
test conditions
40 °C, relative humidity 90-100%, 96 hours then cool to ambient, 2 hours at ambient condi-
tions
requirements
dielectric strength: 500 Vac at 1 minute; insulation resistance: 500 Vdc / 50 MΩ min.; contact
resistance: 100 mΩ max.
dry test
test conditions
requirements
salt spray test
test conditions
requirements
Operating range:
temperature
humidity
70 °C, relative humidity 70-85%, 96 hours then cool to ambient, 2 hours at ambient conditions
no deformation; insulation resistance: 500 Vdc / 50 MΩ min.; contact resistance: 100 mΩ max.
5% NaCl salt mist, 35 ±2 °C, relative humidity 90-95%, 24 hours; parts washed after testing
electrical and mechanical specifications above are met; contact resistance: 80 mΩ max.
-25 °C to 70° C
85% or less