50-00187 Datasheet, PDF (1/1 Pages) Tensility International Corp. – 20802 Sockeye Place #130 Bend, OR 97701 USA

Materials
1. Insulator, PBT, black
2. Shell, C3604 brass, 2 μm nickel plated
3. Spring contact, C5191 phosphor bronze, 2 μm nickel
plated

Electrical requirements
Dielectric strength: 1 min @ 500 Vac
Insulation resistance: 100 MΩ @ 500 Vdc
Contact resistance: 30 mΩ or less
Rated voltage: 20 Vdc
Rated current: 7 A

Mechanical requirements
Insertion force: 0.3-3 kgf
Withdrawal force: 0.3-3 kgf
Durability: 5000 mating cycles while maintaining; 0.3-2 kgf
 insertion force, 0.2-1.5 kgf withdrawal force and a less than
100 mΩ contact resistance.

Environmental requirements
Damp test: 40 °C, RH 90-100% for 96 hrs. Cool to ambient
and recover for 2 hours. Maintain dielectric strength of 500
Vac for 1 min, insulation resistance of 50 MΩ @ 500 Vdc
minimum and a contact resistance of 100 mΩ or less.

Dry test: 70 °C, RH 70-85% for 96 hrs. Cool to ambient and
recover for 2 hours. Maintain insulation resistance of 50
MΩ @ 500 Vdc minimum and a contact resistance of 100
mΩ or less.

Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs.
Wash parts after test. Maintain mechanical requirements
and a contact resistance of less than 80 mΩ.

Operating range
-25 to 70 °C, relative humidity of 85% or less
+0.10
2.5 - 0
1.5 ±0.10
2 ±0.30
0.5 ±0.10
1.8 ±0.20
15.8 ±0.30
20.5 ±0.50
6.5 ±0.20
0.7
2
1
3
10.5 ±0.50
1.5
Revision Date
Description
A
11/28/2011 Initial release
A1
11/9/2012 Added test data
A2
12/6/2012 Updated item description
5
RoHS compliant
Notes
Function test: no open, no short circuit, no INT
20802 Sockeye Place #130
Bend, OR 97701 USA
tel [phone] fax [phone]
800 877.670.7118 www.tensility.com
DIMENSIONS ARE IN MILLIMETERS
TOLERANCES:
X:
0.5 mm
X.X: 0.3 mm
X.XX: 0.05 mm
DESCRIPTION:
Connector, dc plug, 5.5x2.5xL20.5 mm,
molding style, spring contacts
4
3
2
SIZE Part number
A 50-00187
SCALE: 2:1 WEIGHT:
SHEET 1 OF 1
1