DG300A Datasheet, PDF (5/10 Pages) Intersil Corporation – TTL-Compatible, CMOS Analog Switches

DG300A/301A/302A/303A
Specifications^a
Parameter
Analog Switch
Analog Signal Range^e
Drain-Source On-Resistance
Source Off Leakage Current
Drain Off Leakage Current
Drain On Leakage Current
Digital Control
Input Current with
Input Voltage High
Input Current with
Input Voltage Low
Dynamic Characteristics
Turn-On Time
Turn-Off Time
Break-Before-Make Time
Charge Injection
Source-Off Capacitance
Drain-Off Capacitance
Channel-On Capacitance
Input Capacitance
Off-Isolation
Crosstalk (Channel-to-Channel)
Power Supplies
Positive Supply Current
Negative Supply Current
Positive Supply Current
Negative Supply Current
Symbol
Conditions Unless Other-
wise Specified
V+ = 15 V, V– = –15 V
V_IN = 0.8 V or V_IN = 4 V^f
Temp^b
Typ^c
A Suffix B/C Suffix
–55 to 125_C
Min^d Max^d Min^d Max^d Unit
V_ANALOG
r_DS(on)
I_S(off)
I_D(off)
I_D(on)
V_D = "10 V, I_S = –10 mA
V_S = "14 V, V_D = #14 V
V_D = V_S = "14 V
Full
–15 15 –15 15
V
Room 30
Full
50
75
50
75
W
Room "0.1 –1
1
–5
5
Hot
–100 100 –100 100
Room "0.1 –1
1
–5
5
Hot
–100 100 –100 100
nA
Room "0.1 –1
1
–5
5
Hot
–100 100 –100 100
V_IN = 5 V
Room –0.001 –1
Full
–1
–1
I_INH
V_IN = 15 V
Room 0.001
Full
1
1
1
mA
I_INL
V_IN = 0 V
Room –0.001 –1
Full
–1
–1
t_ON
Room 150
300
See Figure 2
t_OFF
Room 130
250
ns
t_OPEN
DG301A/303A Only
Figure 3
Room 50
Q
C_L = 1 nF, R_gen = 0 W
V_gen = 0 V, Figure 4
Room
8
pC
C_S(off)
Room 14
C_D(off)
V_S, V_D = 0 V, f = 1 MHz
Room 14
C_D(on)
Room 40
pF
C_in
f = 1 MHz
V_IN = 0 V
Room
6
V_IN = 15 V Room
7
OIRR
X_TALK
V_IN = 0 V, R_L = 1 kW
V_S = 1 V_rms, f = 500 kHz
Room 62
Room 74
dB
I+
V_IN = 4 V (One Input)
Room 0.23
Full
0.5
1
1
mA
I–
All Others = 0 V
Room –0.001 –10
Full
–100
–100
I+
Room 0.001
10
Full
100
100 _mA
I–
V_IN = 0.8 V (All Inputs)
Room –0.001 –10
Full
–100
–100
Notes:
a. Refer to PROCESS OPTION FLOWCHART.
b. Room = 25_C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
e. Guaranteed by design, not subject to production test.
f. V_IN = input voltage to perform proper function.
Siliconix
5
S-52880—Rev. C, 28-Apr-97